| 手柄落料、冲孔级进模设计及制造 |
| |
| 引用本文： | 彭广威. 手柄落料、冲孔级进模设计及制造[J]. 模具技术, 2008, 0(1): 28-30 |
| |
| 作者姓名： | 彭广威 |
| |
| 作者单位： | 株洲职业技术学院,机械工程系,湖南,株洲,412001 |
| |
| 摘 要： | 分析了手柄冲压成形的工艺特点，设计了一副落料、冲孔级进模；介绍了该模具的结构特点、设计思路以及装配和制造中应注意的问题。
|
| 关 键 词： | 手柄落料 冲孔 级进模 模具结构 |
| 文章编号： | 1001-4934（2008）01-0028-03 |
| 收稿时间： | 2007-08-08 |
| 修稿时间： | 2007-08-08 |
Design and manufacturing of progressive die for handle with blanking-piercing |
| |
| PENG Guang-wei. Design and manufacturing of progressive die for handle with blanking-piercing[J]. Die and Mould Technology, 2008, 0(1): 28-30 |
| |
| Authors: | PENG Guang-wei |
| |
| Abstract: | The technological characteristics of punching the handle part were analyzed. A progressive die with blanking and flanging processes was designed. Its structural characteristics, design method and some problems require consideration in assembly and manufacturing were also introduced. |
| |
| Keywords: | handle＇ s blanking piercing progressive die die structure |
| 本文献已被 维普 万方数据 等数据库收录！ |
