| 钛合金微弧氧化医用涂层形成机制 |
| |
| 引用本文： | 王凤彪,狄士春.钛合金微弧氧化医用涂层形成机制[J].腐蚀与防护,2012(5):400-403. |
| |
| 作者姓名： | 王凤彪 狄士春 |
| |
| 作者单位： | 哈尔滨工业大学精密与特种加工研究所;大连交通大学信息工程学院 |
| |
| 摘 要： | 利用微弧氧化技术在钛合金表面制备了医用涂层,通过SEM观测不同氧化阶段涂层形貌,并分析各阶段微弧放电特性。研究了两极电化学反应过程,建立了工作液负载等效电路,提出了钛合金微弧氧化生成羟基磷灰石医用陶瓷涂层机制。结果表明,电压会直接决定试样表面的电荷分布,增加表面电荷积累,增强工作液中带电钙、磷粒子的扩散和电泳程度,从而加速涂层物质的瞬间反应。
|
| 关 键 词： | 微弧氧化 等效电路 羟基磷灰石 电泳 |
Formation Mechanism of Micro-arc Oxidation Medical Coating on Titanium Alloy Surface |
| |
| WANG Feng-biao,DI Shi-chun.Formation Mechanism of Micro-arc Oxidation Medical Coating on Titanium Alloy Surface[J].Corrosion & Protection,2012(5):400-403. |
| |
| Authors: | WANG Feng-biao DI Shi-chun |
| |
| Affiliation: | 1(1.Insitute of Non-traditional Machining and Mechatronical Control,Harbin Institute of Technology,Harbin 150001,China; 2.Insitute of Information and Engineering,Dalian Jiaotong University,Dalian 116023,China) |
| |
| Abstract: | Medical coatings on titanium alloy surface were prepared by micro-arc oxidation(MAO).The morphology characteristics of coatings at different oxidation stages were observed by scanning electron microscopy(SEM).The micro-arc discharge characteristics and electrochemical reaction of the two electrods were studied.The equivalent circuit of electrolyte load was established and analyzed.The hydroxyl-apatite(HA) coating formation mechanism of MAO was proposed.The results showed that the voltage could affect the charge distribution on specimen surface directly.The charge accumulation was enhanced,and the diffusion and electrophoresis degree of Ca2+and PO43-increased in electrolyte,which accelerated the instant reaction for the substances in coating. |
| |
| Keywords: | micro-arc oxidation equivalent circuit hydroxyl-apatite electrophoresis |
| 本文献已被 CNKI 等数据库收录！ |
|
