| 合成气压缩机轴承温度高原因分析及解决措施 |
| |
| 引用本文： | 程中波,刘继远.合成气压缩机轴承温度高原因分析及解决措施[J].大氮肥,2013(6):407-410. |
| |
| 作者姓名： | 程中波 刘继远 |
| |
| 作者单位： | 重庆建峰化工股份有限公司化肥分公司,重庆408601 |
| |
| 摘 要： | 合成气压缩机在运行过程中出现了轴承温度高的问题．通过分析轴承顶间隙、预负荷系数和瓦块形线的偏差、浮环密封组件；Oum质量及安装过程中存在的缺陷，找出轴承温度高的主要原因是轴承装配间隙及轴承预负荷系数的选取不合理所致，提出相应的解决措施。
|
| 关 键 词： | 合成气压缩机 轴承温度 轴承间隙 预负荷系数 |
RESEARCH ON HIGH BEARING TEMPERATURE IN SYNGAS COMPRESSOR AND MEASURES TAKEN |
| |
| Cheng Zhongbo,Liu Jiyuan.RESEARCH ON HIGH BEARING TEMPERATURE IN SYNGAS COMPRESSOR AND MEASURES TAKEN[J].Large Scale Nitrogenous Fertilizer Industry,2013(6):407-410. |
| |
| Authors: | Cheng Zhongbo Liu Jiyuan |
| |
| Affiliation: | ( Chongqing Jianfeng Chemical Co. ,Ltd., Chongqing 408601 ) |
| |
| Abstract: | High temperature appeared on bearing of syngas compressor during its operation. After study- ing the bearing top clearance, preloading coefficient, offset of bearing pad morphological line, the process quality of floating ring seal set and defects during installation, the main reasons of high bearing temperature were found that bearing assembly clearance and selected bearing preloading coefficient were not correct. Corresponding measures were proposed. |
| |
| Keywords: | syngas compressor bearing temperature bearing clearance preloading coefficient |
| 本文献已被 维普 等数据库收录！ |
