| Abstract: | The impact of extraction methodology and polarity of extraction solvents on the assay of phenolic compounds was investigated using parsley (Petroselinum crispum) flakes as a model substrate. This systematic study was undertaken to address substantial variations in the extraction procedures, solvents and conditions as described in the recent literature. Five different extraction procedures [shaking, vortex mixing, sonication, stirring and pressurized liquid extraction (PLE)] and three different solvents (methanol, ethanol and acetone), with five different solvent to water ratios per solvent, were used for extraction. Extracts were analyzed for phenolic content by high‐performance liquid chromatography and Folin–Ciocalteu assays. The yields of phenolic compounds extracted with a pressurized liquid extractor were comparable to or better than those of four classical extraction procedures. Optimum extraction efficiency with PLE was obtained when extractions were performed with four extraction cycles using ethanol–water (50:50, v/v). The amount of apiin (4,5,7‐trihydroxyflavone 7‐apiosylglucoside) and malonylapiin (apigenin malonylapiosylglucoside) isolated from parsley varied with the composition of extraction solvent. Apiin extractability was found to be a maximum when the solvent (ethanol, methanol or acetone) to water ratio was 30:70 (v/v), whereas higher amounts of malonylapiin were isolated with a reverse solvent to water ratio (70:30, v/v). Malonylapiin was not detected when parsley samples were extracted with organic solvent to water ratios of 10:90 (v/v) and 30:70 (v/v). Published in 2006 by John Wiley & Sons, Ltd |
