| 旅行包托柄注塑模设计与工艺分析 |
| |
| 引用本文： | 宋丽华,康俊远,罗柄超.旅行包托柄注塑模设计与工艺分析[J].塑料科技,2011,39(9). |
| |
| 作者姓名： | 宋丽华 康俊远 罗柄超 |
| |
| 作者单位： | 1. 黑龙江农业工程职业学院 黑龙江哈尔滨150088
2. 广东轻工职业技术学院,广东广州,510300 |
| |
| 摘 要： | 通过研究旅行包托柄的产品结构和注塑成型存在的工艺问题,确定了一模一腔的注塑模结构。模具采用斜导柱侧抽芯机构两,个弯销驱动内外滑块侧抽芯机构浇,注系统和温度控制系统。
|
| 关 键 词： | 旅行包托柄 内外滑块 弯销 脱模机构 |
Design and Processing Analysis of Injection Mould for Traveling Bag Stock |
| |
| Song Lihua,Kang Junyuan,Luo Bingchao.Design and Processing Analysis of Injection Mould for Traveling Bag Stock[J].Plastics Science and Technology,2011,39(9). |
| |
| Authors: | Song Lihua Kang Junyuan Luo Bingchao |
| |
| Affiliation: | Song Lihua1,Kang Junyuan2,Luo Bingchao2 1 Heilongjiang Agricultural Engineering Vocational College,Harbin 150088,China2 Guangdong Industry Technical College,Guangzhou 510300,China |
| |
| Abstract: | An injection mould structure with one module and one cavity was determined by studying the product structure and technology problems in injection forming of traveling bag stock.The mould adopts slanted guide pillar side core-pulling structure,inner-out sliding block side core-pulling mechanism driven by two bent-pins,gating system and temperature control system. |
| |
| Keywords: | Traveling bag stock Inner-out sliding block Bent-pin Demoulding mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
