| 电火花加工过程中电极材料蚀除机理研究 |
| |
| 引用本文： | 崔景芝,王振龙. 电火花加工过程中电极材料蚀除机理研究[J]. 电加工与模具, 2006, 0(6): 5-9 |
| |
| 作者姓名： | 崔景芝 王振龙 |
| |
| 作者单位： | 哈尔滨工业大学机电工程学院,黑龙江哈尔滨,150001 |
| |
| 摘 要： | 从电火花加工过程中的能量分配、放电通道变化、通道热源以及电极材料蚀除4个方面，就目前国内外的研究现状以及所涉及的关键技术进行了详尽的综述。介绍了分子动力学、粒子模拟等新方法在电加工电极材料蚀除机理研究中的应用，指出了电加工过程中电极材料蚀除机理的进一步研究方向。
|
| 关 键 词： | 电火花加工 能量分配 放电通道 电极材料蚀除 |
| 收稿时间： | 2006-10-12 |
| 修稿时间： | 2006-10-12 |
The Reserches of Electrode Material Erosion on EDM Simulation |
| |
| Cui Jingzhi,Wang Zhenlong. The Reserches of Electrode Material Erosion on EDM Simulation[J]. Electromachining & Mould, 2006, 0(6): 5-9 |
| |
| Authors: | Cui Jingzhi Wang Zhenlong |
| |
| Affiliation: | Harbin Institute of Technology, Harbin 150001, China |
| |
| Abstract: | The researches of energy distribution, translation of discharge channel and electrode material erosion during discharge in electrical discharge machining are analyzed in detail, New method, including molecular dynamics simulation and particle in cell method applied in EDM simulation is described. Some directions of further research on EDM simulation is indicate. |
| |
| Keywords: | EDM energy distribution discharge channel electrode material erosion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
