| 工具钢-普碳钢复合板爆炸焊接试验与分析 |
| |
| 引用本文： | 李明,张新华.工具钢-普碳钢复合板爆炸焊接试验与分析[J].爆破,2009,26(2). |
| |
| 作者姓名： | 李明 张新华 |
| |
| 作者单位： | 南华大学核资源与安全工程学院,衡阳,421001;南华大学核资源与安全工程学院,衡阳,421001 |
| |
| 摘 要： | 运用金相技术和扫描电子显微镜,分析工具钢-普碳钢复合板爆炸焊接的结果.通过选取最佳的爆炸焊接参数,解决复合板爆炸焊接试验中易出现的裂纹以及边界不易焊合现象.结果显示,起爆端界面波形比较微小,然后逐渐增大,但是增幅较微弱,界面的结合强度较高,并且复合板的结合区存在着金属强烈的塑性变形、熔化和原子间的相互扩散等冶金过程.
|
| 关 键 词： | 爆炸焊接 金相技术 扫描电子显微镜 工具钢-普碳钢 |
Experiment and Analysis on Jointing of Tool Steel and Carbon Steel by Explosive Welding |
| |
| LI Ming,ZHANG Xin-hua.Experiment and Analysis on Jointing of Tool Steel and Carbon Steel by Explosive Welding[J].Blasting,2009,26(2). |
| |
| Authors: | LI Ming ZHANG Xin-hua |
| |
| Affiliation: | School of Nuclear Resoutces and Safety Engineering;The University ofSouth China;Hengyang 42001;China |
| |
| Abstract: | The results of explosive welding tool steel-crubon steel compound board were analyzed by means of the metallographic techniques and the scanning electron microscope.In explosive welding experiment,in order to avoid crack and make the boundaries welded together,it is very necessary to select the explosive welding parameters carefully.The results showed that the wave of the contact surface from the initiation point was micro,then increased gradually,but the increased range was quite weak,the adhesive strength... |
| |
| Keywords: | explosive welding metallography scanning electron microscope tool teel-carbon steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
