| 光固化快速成型制件的精度研究 |
| |
| 引用本文： | 赵清,方芳,王鹏. 光固化快速成型制件的精度研究[J]. 机械工程与自动化, 2012, 0(2): 96-98 |
| |
| 作者姓名： | 赵清 方芳 王鹏 |
| |
| 作者单位： | 沈阳工业大学机械工程学院 |
| |
| 摘 要： | 光固化快速成型是目前较为成熟的一种快速成型方法,其制件精度较低。以实体件为例,对影响光固化快速成型制件精度的各种参数进行了实验研究,并对各参数进行了分析。
|
| 关 键 词： | 光固化成型 精度 工艺参数 |
Research on Part Precision of Stereo Lithography Apparatus |
| |
| ZHAO Qing,FANG Fang,WANG Peng. Research on Part Precision of Stereo Lithography Apparatus[J]. Mechanical Engineering & Automation, 2012, 0(2): 96-98 |
| |
| Authors: | ZHAO Qing FANG Fang WANG Peng |
| |
| Affiliation: | (School of Mechanical Engineering,Shenyang University of Technology,Shenyang 110870,China) |
| |
| Abstract: | Stereo Lithography Apparatus(SLA) is one of most mature rapid prototyping methods,but the precision of SLA parts is low.In the article,based on an example,the parameters which influence the accuracy of SLA parts were studied and analyzed. |
| |
| Keywords: | SLA precision process parameters |
| 本文献已被 CNKI 等数据库收录！ |
|
