| 钛合金超声振动研磨表面粗糙度特性试验研究 |
| |
| 引用本文： | 朱林,李继云. 钛合金超声振动研磨表面粗糙度特性试验研究[J]. 金刚石与磨料磨具工程, 2010, 30(6): 62-64,69. DOI: 10.3969/j.issn.1006-852X.2010.06.014 |
| |
| 作者姓名： | 朱林 李继云 |
| |
| 作者单位： | [1]西安石油大学机械工程学院,西安710065 [2]咸阳宝石钢管钢绳有限责任公司,咸阳712000 |
| |
| 摘 要： | 根据超声振动研磨加工原理,采用自行研制的超声振动研磨装置对塑性难加工材料钛合金(TC4)表面粗糙度特性进行了试验研究。试验采用单因素法,分别研究了工件转速、超声振动振幅以及磨料粒度对工件表面粗糙度的影响规律。试验结果表明:超声振动的附加在一定程度上降低了工件表面粗糙度。所获得的结论对超声振动研磨中加工参数的选择具有一定的参考价值。
|
| 关 键 词： | 钛合金 超声振动研磨 表面粗糙度特性 |
Experimental research on the surface roughness characteristics of titanium alloy by ultrasonic vibration lapping method |
| |
| Zhu Lin,Li Jiyun. Experimental research on the surface roughness characteristics of titanium alloy by ultrasonic vibration lapping method[J]. Diamond & Abrasives Engineering, 2010, 30(6): 62-64,69. DOI: 10.3969/j.issn.1006-852X.2010.06.014 |
| |
| Authors: | Zhu Lin Li Jiyun |
| |
| Affiliation: | Zhu Lin Li Jiyun ( 1. School of Mechanical Engineering, Xi＇an Shiyou University, Xi＇an 710065, China;2. Xianyang BOMCO Steel Tube ＆ Wire Rope Co. ,Ltd, Xianyang 712000, China) |
| |
| Abstract: | Based on the machining principle of ultrasonic vibration lapping, the surface roughness characteristics of hard-to-machine titanium alloys were studied through experiments using self-developed ultrasonic vibration lapping device. The influence law of workpiece speed, ultrasonic amplitude and abrasive grain size on the machined surface roughness were researched by using single-factor testing method. The research results show that surface roughness is reduced to some extent owing to the assistance of ultrasonic vibration. The conclusions provide a certain reference for the optimization of processing parameter in ultrasonic vibration lapping. |
| |
| Keywords: | titanium alloy ultrasonic vibration lapping surface roughness characteristics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
