| 挤压后硼酸铝晶须增强铝复合材料表面的腐蚀特征 |
| |
| 引用本文： | 胡津,姚忠凯,赵连城. 挤压后硼酸铝晶须增强铝复合材料表面的腐蚀特征[J]. 中国腐蚀与防护学报, 2003, 23(4): 217-220 |
| |
| 作者姓名： | 胡津 姚忠凯 赵连城 |
| |
| 作者单位： | 1. 哈尔滨工业大学材料科学与工程学,哈尔滨,150001;金属腐蚀与防护国家重点实验室,沈阳,110016
2. 哈尔滨工业大学材料科学与工程学,哈尔滨,150001 |
| |
| 基金项目： | 哈尔滨工业大学校基金 (ACQQ180 0 0 0 5 8) |
| |
| 摘 要： | 利用原于力显微镜观察了挤压态Al18B4O33 w／pure Al复合材料早期腐蚀过程中表面形貌的变化特征．研究了沿与挤压方向成不同角度截取的Al18B4O33 w／pure Al复合材料在3．5％NaCl溶液中的腐蚀规律．结果表明：晶须与基体的界面是腐蚀易于发生的地方．点蚀首先在晶须的端部产生，随后沿着晶须与基体的界面扩展．挤压后沿与挤压方向成不同角度截取的Al18B4O33 w／pure Al复合材料表面腐蚀坑的深度存在差别．
|
| 关 键 词： | 挤压 Al18B3O33w／pure Al复合材料 腐蚀 原子力显微镜 |
| 文章编号： | 1005-4537(2003)04-0217-04 |
CHARACTERISTICS OF CORRODED SURFACE OF EXTRUDED ALUMINUM BORATE WHISKER REINFORCED PURE ALUMINUM COMPOSITE |
| |
| HU Jin ,,YAO Zhongkai ,ZHAO Liancheng. CHARACTERISTICS OF CORRODED SURFACE OF EXTRUDED ALUMINUM BORATE WHISKER REINFORCED PURE ALUMINUM COMPOSITE[J]. Journal of Chinese Society For Corrosion and Protection, 2003, 23(4): 217-220 |
| |
| Authors: | HU Jin YAO Zhongkai ZHAO Liancheng |
| |
| Affiliation: | HU Jin 1,2,YAO Zhongkai 1,ZHAO Liancheng 1 |
| |
| Abstract: | The changes of the surface morphology of an extruded composite of Al 18B 4O 33 w/pure Al during the early stages of corrosion by 3.5%NaCl solution were observed by atomic force microscopy.The features of corrosion of the composite samples with different normal angles to the extrusion orientation in 3.5%NaCl solution were studied.The results indicated that corrosion occurred preferentially at the interface between whisker and matrix.Pitting occurred frequently at the end of whisker firstly and propagated along the interface between whisker and matrix.The number and size of pits on the surfaces of the extruded Al 18B 4O 33 w/pure Al composite samples are different due to the sample surfaces with various angles to the extrusion orientation of the bulk composite. |
| |
| Keywords: | extrusion Al 18B 4O 33w/pure Al composite corrosion atomic force microscopy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
