Tin Whiskers Formation on an Electronic Product: A Case Study |
| |
Authors: | Nausha Asrar Oliver Vancauwenberghe Sebastien Prangere |
| |
Affiliation: | (1) Sugar Land Technology Center – Schlumberger, Sugar Land, TX 77478, USA;(2) Schlumberger MEMS-TC, 78990 Elancourt, France |
| |
Abstract: | During qualification testing, a printed circuit board (PCB) of an electronic device for a drilling tool failed. The circuit
board was exposed to a 120 h aging cycle at 180°C followed by 10 thermal cycles between −40 and 180°C before a failure was
noticed. During inspection numerous white whiskers were observed over a lead-free solder surface. Scanning electron microscopy
(SEM) and energy-dispersive X-ray spectrometry (EDS) were used for microscopic examination and material characterization of
the whiskers, end-cap metallization, and the solder materials. The tin whisker formation was attributed to the compressive
stress in the tin solder material, which was caused by diffusion of the end cap metallization, formation of intermetallics,
and thermal cycling of the soldered components. Recommendations are given to mitigate/control whisker formation on the lead-free
solder materials. |
| |
Keywords: | Tin whiskers Thermal cycling Intermetallics Lead-free solder |
本文献已被 SpringerLink 等数据库收录! |
|