首页 | 本学科首页   官方微博 | 高级检索  
     

动态硫化EPDM/PP热塑性弹性体制备工艺研究
引用本文:蒋涛,何昌鑫.动态硫化EPDM/PP热塑性弹性体制备工艺研究[J].胶体与聚合物,1999,17(1):24-27.
作者姓名:蒋涛  何昌鑫
作者单位:湖北大学化学与材料科学学院!武汉,430062,湖北大学化学与材料科学学院!武汉,430062,湖北大学化学与材料科学学院!武汉,430062,湖北大学化学与材料科学学院!武汉,430062,湖北大学化学与材料科学学院!武汉,430062
摘    要:研究了不同硫化体系 ,硫化时间 ,硫化剂的用量 ,共混温度 ,橡塑比 ,填充炭黑和软化剂的用量对动态硫化 EPDM/ PP共混物性能的影响。研究结果表明 :酚醛硫化体系制得的 EPDM/ PP共混物加工性能和力学性较佳 ,硫化时间在 10~ 15 min,硫化剂的用量以完全交联 EPDM为宜 ,共混温度控制在 170℃~ 190℃ ,橡塑比 70 / 3 0~ 5 0 / 5 0 ,填充炭黑在 40份以内 ,软化剂在 2 0份以内较为理想

关 键 词:EPDM  PP  动态硫化  制备工艺

STUDY ON PREPARATION TECHNOLOGY OF DYNAMIC VULCANIZED EPDM/PP THERMOPLASTIC ELASTOMER
Jiang Tao,He Changxin,Xiao Hanwen,Liu Shaobo,Jiang Xueliang.STUDY ON PREPARATION TECHNOLOGY OF DYNAMIC VULCANIZED EPDM/PP THERMOPLASTIC ELASTOMER[J].Chinese Journal of Colloid and Polymer,1999,17(1):24-27.
Authors:Jiang Tao  He Changxin  Xiao Hanwen  Liu Shaobo  Jiang Xueliang
Abstract:The effects of different curing systems,curing time,content of curing agents,blending temperature,ratio of rubber to plastics and content of filler carbon and oil on properties of dynamic vnlcanizated EPDM/PP blend were investigated.The results showed that a phenolic resin curing system provides the blends with excellent mechanical properties and processability,10~15min’s curing time and content of curing agents which crosslinked rubher fully were better.When blending temperature was 170℃~190℃,ratio of EPDM/PP was 70/30~50/50,content of filler carbon and oil was within 40phr,20phr,respectivly.blend had better properties.
Keywords:EPDM  PP  Dynamic vulcanization  Preparation technology
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号