Similar and dissimilar resistance spot welding of advanced high strength steels: welding and heat treatment procedures,structure and mechanical properties

Similar and dissimilar combinations of a 1000 MPa galvanised dual phase (DP) steel and a 980 MPa transformation induced plasticity (TRIP) steel were resistance spot welded under different welding and heat treatment parameters. The microstructure and mechanical properties of spot welds were evaluated using metallographic technique, microhardness and tensile shear tests. The results showed that the tendency to fail in the pullout mode increased in the order of DP/DP, TRIP/TRIP and DP/TRIP welds, which was caused by the different hardness distribution, carbon equivalent and susceptibility to shrinkage void formation of spot welds for different combinations. In the study of the effects of heat treatments on the DP/TRIP welds, the pre-heating procedure improved the splash of welding to some extent. When the cooling time was larger than or equal to 1000 ms, the post-heating procedure improved the mechanical properties of spot welds owing to the temper of spot weld microstructure.