| 轴承座自动加工控制系统的设计与实现 |
| |
| 引用本文： | 刘凌云,罗敏,吴岳敏,马彬,徐金瑜.轴承座自动加工控制系统的设计与实现[J].机床与液压,2019,47(2):181-185. |
| |
| 作者姓名： | 刘凌云 罗敏 吴岳敏 马彬 徐金瑜 |
| |
| 作者单位： | 湖北汽车工业学院电气工程系,湖北十堰,442002;湖北汽车工业学院电气工程系,湖北十堰,442002;湖北汽车工业学院电气工程系,湖北十堰,442002;湖北汽车工业学院电气工程系,湖北十堰,442002;湖北汽车工业学院电气工程系,湖北十堰,442002 |
| |
| 摘 要： | 采用工序集中对轴承座工艺路线进行优化,并针对工艺装备系统提出了改造方案,即在原有FANUC数控系统基础之上,增加PLC、工业机器人系统,通过三者之间的两两通信,实现各控制单元的分工协作,以满足轴承座工件的输送、上下料及加工过程的全自动需求。经实际运行,该改造方案极大地降低了工人的劳动强度,具有较强的工程实际应用价值。
|
| 关 键 词： | 工业机器人 自动上下料 工序集中 数控改造 |
Design and Implementation of the Automatic Processing Control System Aimed at Bearing Block |
| |
| LIU Lingyun,LUO Min,WU Yuemin,MA Bin,XU Jinyu.Design and Implementation of the Automatic Processing Control System Aimed at Bearing Block[J].Machine Tool & Hydraulics,2019,47(2):181-185. |
| |
| Authors: | LIU Lingyun LUO Min WU Yuemin MA Bin XU Jinyu |
| |
| Affiliation: | (Department of Electrical Engineering,Hubei University of Automotive Technology,Shiyan Hubei 442002,China) |
| |
| Abstract: | The process route of the shaft bearing was optimized using process centralized,and an improvement scheme relative to the technology equipment was put forward which included three control units of PLC,industrial robot system and the existing FANUC NC system.All control units ran efficiently in collaboration with each other to meet the full automatic requirement of the delivery,loading/unloading and processing.The actual operation shows that the transformation scheme greatly reduces the labor intensity of the workers,and has a strong engineering practical value. |
| |
| Keywords: | Industrial robot Automatic loading/unloading Process concentration NC transformation |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
