首页 | 本学科首页   官方微博 | 高级检索  
     

滑动轴承贫油润滑特性分析
引用本文:彭立强,郑惠萍,师占群.滑动轴承贫油润滑特性分析[J].机床与液压,2020,48(1):5-8.
作者姓名:彭立强  郑惠萍  师占群
作者单位:河北科技大学机械工程学院,河北石家庄050018;河北工业大学机械工程学院,天津300130;河北科技大学机械工程学院,河北石家庄050018;河北工业大学机械工程学院,天津300130
基金项目:国家自然科学基金资助项目(51275150;51875166)
摘    要:基于广义Reynolds方程,建立圆柱滑动轴承贫油润滑模型,分析了入口油膜厚度对滑动轴承贫油润滑性能的影响。数值计算结果表明:在载荷和转速不变时,供油条件明显影响油膜收敛区的油膜厚度、承载力等参数;随入口油膜厚度的增加,滑动轴承承载区油膜厚度、端泄流量、有效承载面积增加,而轴承偏心率和油膜起始角随供油量的增加而减小。

关 键 词:供油量  滑动轴承  贫油润滑特性  油膜厚度

Analysis in Starved Lubrication Characteristics of Sliding Bearing
PENG Liqiang,ZHENG Huiping,SHI Zhanqun.Analysis in Starved Lubrication Characteristics of Sliding Bearing[J].Machine Tool & Hydraulics,2020,48(1):5-8.
Authors:PENG Liqiang  ZHENG Huiping  SHI Zhanqun
Affiliation:(School of Mechanical Engineering,Hebei University of Science and Technology,Shijiazhuang Hebei 050018,China;School of Mechanical Engineering,Hebei University of Technology,Tianjin 300130,China)
Abstract:Based on the generalized Reynolds equation, a cylindrical sliding bearing model of starved lubrication is established. The influence of sliding bearing entrance oil film thickness on poor lubrication properties was analyzed. The numerical results show that: oil supply condition affects bearing parameters obviously, such as oil film convergence area, the bearing capacity and other parameters, when the load and the speed are constant. The oil film thickness in the bearing area, the end discharge and the effective bearing area of the bearing zone of the bearing increase with the increase of the oil film at the entrance, and the bearing eccentricity and the starting angle of the oil film decrease with the increase of the oil supply at the entrance.
Keywords:Oil supply  Sliding bearing  Starved lubrication characteristics  Oil film thickness
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《机床与液压》浏览原始摘要信息
点击此处可从《机床与液压》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号