| 挤压铸造锻模件热裂纹的初步研究 |
| |
| 引用本文： | 周惦武,赖华清,周述积. 挤压铸造锻模件热裂纹的初步研究[J]. 铸造设备研究, 2002, 0(1): 28-30 |
| |
| 作者姓名： | 周惦武 赖华清 周述积 |
| |
| 作者单位： | 湖北汽车工业学院材料系 湖北十堰442002(周惦武，赖华清)，湖北汽车工业学院材料系 湖北十堰442002(周述积) |
| |
| 摘 要： | 对挤压铸造模段模件热裂纹进行了初步探讨 ,试验结果表明 ,挤压铸造锻模件形成的热裂纹 ,物理冶金因素起次要作用 ,力学、机械等因素是热裂纹形成与扩展的主要原因 ;锻模件大多数热裂纹出现在产品的最后凝固区域 ,裂纹附近处组织柱状晶区较短 ,而远离裂纹处的柱状晶区较长 ;并提出了降低锻模件热裂纹的几点措施
|
| 关 键 词： | 挤压铸造 锻模件 热裂纹蚀 |
| 文章编号： | 1004-6178(2002)01-0028-03 |
| 修稿时间： | 2001-10-06 |
Study on the Hot Crack of Forging Die Made by Squeeze Casting |
| |
| ZHOU Dian wu,Lai Hua qing,ZHOU Shu ji. Study on the Hot Crack of Forging Die Made by Squeeze Casting[J]. Research Studies On Foundry Equipment, 2002, 0(1): 28-30 |
| |
| Authors: | ZHOU Dian wu Lai Hua qing ZHOU Shu ji |
| |
| Abstract: | In this paper,the hot crack for the forging die made by squeeze casting has been studied.The results show that the metallurgy has the minor effect on the formation of hot crack,and the dynamics and mechanism are the great factors to the information and expansion of hot crack.The most hot crack appear in the ultimate solidfication area of the product.The columnar crystal are shorter nearby the hot cract,but longr away from it.A fow of measurements to reduce the hot crack are put forward also. |
| |
| Keywords: | sequeeze casting forging die hot crack |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
