| ZG310-570表面消失模铸渗层冲击磨损性能研究 |
| |
| 引用本文： | 李晓宾,陈跃,杨涛林,铁喜顺,杜三明,上官宝. ZG310-570表面消失模铸渗层冲击磨损性能研究[J]. 热加工工艺, 2007, 36(9): 44-46 |
| |
| 作者姓名： | 李晓宾 陈跃 杨涛林 铁喜顺 杜三明 上官宝 |
| |
| 作者单位： | 河南科技大学,材料科学与工程学院,河南,洛阳,471003 |
| |
| 基金项目： | 国家自然科学基金;河南省高校杰出科研创新人才工程项目 |
| |
| 摘 要： | 结合消失模铸造工艺和铸渗表面强化技术，在廉价的ZG310-570表面形成一层碳化钒／高铬铸铁复合层。在MED-10型动载磨料磨损试验机上研究了四种铸渗层成分不同的试样在3J能量冲击下的抗磨损性能．并借助JSM-5610LV扫描电镜研究了铸渗复合层的组织结构和磨损形貌。实验结果表明：铸渗剂中FeV50．A为10％（质量分数）时获得的铸渗试样抗冲击磨损性能最好，是ZG310-570试样的71倍。
|
| 关 键 词： | 消失模铸渗工艺 碳化钒 高铬铸铁 冲击磨损性能 |
| 文章编号： | 1001-3814（2007）01-0044-03 |
| 修稿时间： | 2006-09-30 |
Research on Impact Wear Resistance of LFC-penetration Composite Layer Based on ZG310-570 Steel |
| |
| LI Xiao-bin,CHEN Yue,YANG Tao-lin,TIE Xi-shun,DU San-ming,SHANG Guan-bao. Research on Impact Wear Resistance of LFC-penetration Composite Layer Based on ZG310-570 Steel[J]. Hot Working Technology, 2007, 36(9): 44-46 |
| |
| Authors: | LI Xiao-bin CHEN Yue YANG Tao-lin TIE Xi-shun DU San-ming SHANG Guan-bao |
| |
| Abstract: | The vanadium carbide/high chrome cast iron composite layer was formed on the surface of low-cost ZG310-570 by combining LFC process and casting penetration process. The wear resistance of four different composition specimens was studied on MLD-10 testing machine under 3J impact energy. The microstructure and abrasion morphology of composite layer were studied using JSM-5610LV SEM. The results show that the specimen which contains 10% FeV50-A (mass fraction) in the casting penetration agent has the best impact wear resistance which is 71 times as much as ZG310-570 specimen. |
| |
| Keywords: | LFC-penetration process vanadium carbide high chrome cast iron impact wear resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
