| 多楔楔横轧端面移动量实时测试系统研制 |
| |
| 引用本文： | 邢希东, 束学道, 胡正寰. 多楔楔横轧端面移动量实时测试系统研制[J]. 工程科学学报, 2004, 26(5): 548-550. DOI: 10.13374/j.issn1001-053x.2004.05.023 |
| |
| 作者姓名： | 邢希东 束学道 胡正寰 |
| |
| 作者单位： | 北京科技大学机械工程学院,北京,100083;山东理工大学机械工程学院,淄博,255049;北京科技大学机械工程学院,北京,100083 |
| |
| 基金项目： | 国家自然科学基金;国家自然科学基金 |
| |
| 摘 要： | 研制了多楔楔横轧端面移动量实时测试系统.准确测出单楔与多楔轧制过程中轧件端面移动量变化全貌,分析得到端面移动量变化规律,并与有限元模拟结果比较,其误差在17%以下,证明上述端面移动量测试系统准确可行.
|
| 关 键 词： | 多楔 楔横轧 实时检测 检测系统 |
| 收稿时间： | 2004-02-22 |
Real-time Testing System of Displacement of the End of Workpieces in Multi-wedge Cross Wedge Rolling |
| |
| XING Xidong, SHU Xuedao, HU Zhenghuan. Real-time Testing System of Displacement of the End of Workpieces in Multi-wedge Cross Wedge Rolling[J]. Chinese Journal of Engineering, 2004, 26(5): 548-550. DOI: 10.13374/j.issn1001-053x.2004.05.023 |
| |
| Authors: | XING Xidong SHU Xuedao HU Zhenghuan |
| |
| Abstract: | The real-time online monitoring system of displacement of the end of rolled parts in Multi-wedge Cross Wedge Rolling (MCWR) was developed. It can measure the movement of the end of workpieces exactly in the course of single-wedge cross wedge rolling and MCWR. The regularity of movement of the end of workpiece was discovered by analysis in detail. The theoretical result is in agreement with the testing, with the error less than 17%, which demonstrates the accuracy and reliability in movement of the testing system. |
| |
| Keywords: | multi-wedge cross wedge rolling real-time monitoring testing system |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
|
