| 加拿大合成原油常压重油催化裂化反应性能的研究 |
| |
| 引用本文： | 李小娜,王刚,高金森,王家喜,周宏勇. 加拿大合成原油常压重油催化裂化反应性能的研究[J]. 炼油技术与工程, 2010, 40(8) |
| |
| 作者姓名： | 李小娜 王刚 高金森 王家喜 周宏勇 |
| |
| 作者单位： | 中国石油大学（北京）重质油国家重点实验室 河北工业大学化工学院 |
| |
| 摘 要： | 以工业平衡剂LBO-16为催化剂,在小型固定流化床上考察了反应温度、剂油比对加拿大合成原油(SCO)常压重油(AR)、混合原油(SCO:大港原油为3:7)常压重油催化裂化反应性能的影响,并在相同的反应条件下,考察了SCO、混合原油及大港原油的AR与其VGO的催化裂化产物产率和分布情况。研究结果表明,反应条件对两种原油AR的催化裂化产物产率变化规律的影响是一致的。在最优的反应条件下,SCOAR及混合原油AR的轻质油收率分别为63.51%,58.37%。SCOAR的催化裂化产物产率与其VGO相比变化不大,混合原油AR及大港原油AR的催化裂化产物产率与其VGO相比分布变差。
|
| 关 键 词： | 常压重油 催化裂化 反应条件 比较 |
Study on catalytic crackability of atmospheric residue of Canadian synthetic crude |
| |
| Li Xiaona,Wang Gang,Gao Jinsen,Wang Jiaxi,Zhou Hongyong. Study on catalytic crackability of atmospheric residue of Canadian synthetic crude[J]. Petroleum Refinery Engineering, 2010, 40(8) |
| |
| Authors: | Li Xiaona Wang Gang Gao Jinsen Wang Jiaxi Zhou Hongyong |
| |
| Affiliation: | 1.State Key Laboratory of Heavy Oil Processing of China University of Petroleum(Beijing) (Beijing 102249; China) 2.School of Chemical Engineering; Hebei University of Technology(Tianjin; 300130; China); |
| |
| Abstract: | The impact of temperature and catalyst to oil ratio on the crackability of AR from Canadian synthetic crude oil(SCO)and blended crude oil(SCO/Dagang Crude oil 3:7)was investigated on a small fixed fluidized bed pilot plant using commercial equilibrium catalysts.The cracking product yields and distributions of AR and VGO from Canadian synthetic crude oil(SCO),blended crude oil and Dagang crude oil were studied under the same reaction conditions.The study results demonstrated that the reaction conditions had ... |
| |
| Keywords: | atmospheric residue catalytic cracking reaction condition comparison |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
