| Moldflow在导光板外框注塑模设计中的应用 |
| |
| 引用本文： | 陈晓勇.Moldflow在导光板外框注塑模设计中的应用[J].工程塑料应用,2011,39(6):71-75. |
| |
| 作者姓名： | 陈晓勇 |
| |
| 作者单位： | 常州机电职业技术学院,常州213l64 |
| |
| 摘 要： | 将几何作图法和CAE软件分析法相结合,解决了导光板外框塑料件点浇口的数目及位置难以确定的问题.利用几何作图法初步确定浇口数目及位置,借助Moldflow软件的分析结果得到最佳方案.采用Moldflow软件对模具的冷却系统进行了优化设计.通过调整管路位置、优化保压曲线、改变模具温度和环境温度等措施解决了塑料件边角处翘曲变...
|
| 关 键 词： | Moldflow 几何作图法 浇口 冷却系统 注塑模 模具设计 |
APPLICATION OF MOLDFLOW IN DESIGN OF INJECTION MOLD FOR THE FRAME OF LIGHT GUIDE PLATE |
| |
| Chen Xiaoyong.APPLICATION OF MOLDFLOW IN DESIGN OF INJECTION MOLD FOR THE FRAME OF LIGHT GUIDE PLATE[J].Engineering Plastics Application,2011,39(6):71-75. |
| |
| Authors: | Chen Xiaoyong |
| |
| Affiliation: | (Changzhou Institute of Mechatronic Technology,Changzhou213164,China) |
| |
| Abstract: | Combining with geometric construction method and CAE software analysis method,the difficult problems of determining the pin-point gate number and location of the frame of light guide plate plastic part were sloved.The gate number and location were determined preliminary by geometric construction method,and the best scheme was concluded based on the analysis results of Moldflow.Moldflow was also applied to the optimization design of cooling system of the injection mold.By adjusting pipe position,optimizing packing profile,changing mold surface temperature and environment temperature,the problem of too large warpage in edge or corner of the plastic part were solved. |
| |
| Keywords: | Moldflow geometric construction method gate cooling system injection mold mold design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
