| 微细精密小孔电火花加工专用水循环系统研制 |
| |
| 引用本文： | 刘建勇,蔡延华,李艳.微细精密小孔电火花加工专用水循环系统研制[J].电加工与模具,2012(5):55-57,63. |
| |
| 作者姓名： | 刘建勇 蔡延华 李艳 |
| |
| 作者单位： | 北京市电加工研究所,北京,100191 |
| |
| 基金项目： | 国家科技重大专项（2011ZX04001-061） |
| |
| 摘 要： | 应用理论分析和三维造型设计相结合的方法,研制微细精密小孔电火花加工专用的水循环系统。在设计过程中将理论知识与三维造型设计紧密结合,以解决水循环系统结构设计和关键零部件选型问题。总结出了一套可推广到相似领域的设计方法,并将冗余设计方法应用于设计过程中。
|
| 关 键 词： | 电火花小孔加工 理论分析 三维造型设计 水循环系统 冗余设计 |
Design of Water Circulation System for Precise Micro-holes＇ EDM |
| |
| Liu Jianyong
,
Cai Yanhua
,
Li Yan.Design of Water Circulation System for Precise Micro-holes＇ EDM[J].Electromachining & Mould,2012(5):55-57,63. |
| |
| Authors: | Liu Jianyong Cai Yanhua Li Yan |
| |
| Affiliation: | ( Beiiing Institute of Electro-Machining,Beiiing 100191 ,China ) |
| |
| Abstract: | In order to design a water circulation system for precise micro-holes＇ EDM, theory analysis and three dimensional design methods were used. In the process of the development, close in-tegration of theory analysis and three dimensional design methods, the problems of the construction de-sign and key parts＇ selection have been solved, a method of water circulation system was given. This method can be extended to the similar fields. The redundancy technology has been used in this field, |
| |
| Keywords: | small hole electro-discharge drilling theory analysis three dimensional design watercirculation system redundancy design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
