首页 | 本学科首页   官方微博 | 高级检索  
     


Vibration in operating heavy haul trucks in overburden mining
Authors:Kumar Shrawan
Affiliation:

Ergonomics Research Laboratory, Department of Physical Therapy, University of Alberta, Edmonton, Alberta, T6G 2G4 Canada

Abstract:The objective of this study was to determine if the vibration in sagittal (x), coronal (y) and vertical (z) axes of the seat pan of the heavy haul trucks used in overburden mining, and the vibration experienced by the drivers at the third lumbar and seventh cervical vertebral levels in operating these trucks exceeded the ISO standards, thereby posing threat to safety. A new and an old truck of two different makes and different carrying capacities (200 and 300 series) were instrumented with a triaxial accelerometer on the seat pan. Fourteen drivers (8 male and 6 female) were instrumented with a triaxial accelerometer at C7 and L3 spinous processes. The vibration at the seat pan, C7, and L3 levels were recorded using an onboard computer with PCMCIA card and, compared against the ISO standards. The vertical vibration of the seat pan in the entire sample ranged from a low of .37 m/s2 to a high of 11.73 m/s2. The vibration at the lumbar level in the sample ranged between .34 and 2.72 m/s2. The values for cervical level vertical vibration in the sample ranged between .2 and 2.22 m/s2. The gender of the driver, truck make, and it's carrying capacity did not have a significant effect on the vibration. However, the body weight of the driver, the segment of the truck and the site of measurement revealed significant differences in vibration (p<0.001). Out of a total 36 combinations (4 trucks×9 recording locations) the seat pan vertical vibration exceeded the ISO standards 8 times for males and 9 times for females. The lumbar vertebral vertical vibration in males exceeded ISO standards 12 times and in females 11 times. The cervical vertebral vertical vibration exceeded ISO standards once in females only. However, in sagittal and coronal planes the whole body vibration exceeded the ISO standards many times. Heavy haul trucks (240 and 320 ton capacity) frequently generated vibrations in excess of ISO standards in overburden mining operation representing a health hazard.
Keywords:Vibration   Heavy haul trucks   Back injury   Neck pain   Overburden mining
本文献已被 ScienceDirect PubMed 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号