Investigation of Freeze Lining in Copper-Containing Slag Systems: Part III. High-Temperature Experimental Investigation of the Effect of Bath Agitation

Freeze-lining technologies have been employed to protect the cooling walls of reactors from chemically aggressive molten reactants. To date, the designs of freeze linings for pyrometallurgical reactors have been based on the basic assumption that the interface between the deposit and the bath remains at the liquidus temperature of the bulk liquid. There is, however, increasing evidence that interface temperature between stagnant deposit and bath is less than the liquidus of the bulk liquid. A previous study also demonstrated that the effects of bath chemistry need to be taken into account in freeze-lining designs. To investigate the fundamental processes involved in the formation and stability of the deposit, experimental laboratory studies have been undertaken in the Cu-Fe-Si-Al-O slag system in equilibrium with metallic copper using an air-cooled probe technique. In the current study, the effects of bath agitation on the microstructure, morphologies of the phases, and formation of various layers across the freeze-lining deposit were studied at steady-state conditions. It appears that the changes in the fluid flow pattern through changes in shear intensities result in corresponding changes in the deposit microstructure, formation of the sealing primary phase layer, thus influencing the interface temperature between freeze-lining deposit and the liquid bath.