首页 | 本学科首页   官方微博 | 高级检索  
     

基于两相电流变换的小电流接地系统故障选线新方法
引用本文:张庆超,杨金飞. 基于两相电流变换的小电流接地系统故障选线新方法[J]. 电力系统自动化, 2007, 31(8): 75-79
作者姓名:张庆超  杨金飞
作者单位:天津大学电气与自动化工程学院,天津市,300072;天津大学电气与自动化工程学院,天津市,300072
基金项目:天津市重点自然科学基金资助项目(0023801211).
摘    要:提出了两相电流旋转变换小电流接地系统单相接地故障选线新方法(简称两相法)。两相电流旋转变换,即每条线路a,b和c相电流与滞后其120°的b,c和a相电流经-60°旋转相加。新判据为非故障线路本身的3个两相电流相等;故障线路本身的3个两相电流之间幅值和相角不同。计算机仿真表明该算法不受故障电阻和负荷的影响,当系统发生单相接地故障时,能准确辨别故障线路。

关 键 词:小电流接地系统  两相电流变换  单相接地故障
收稿时间:2006-10-09
修稿时间:2006-10-092006-12-18

A Novel Method of Fault Line Selection for Non-direct Earth Neutral System Based on Two-phase-current Transformation
ZHANG Qingchao,YANG Jinfei. A Novel Method of Fault Line Selection for Non-direct Earth Neutral System Based on Two-phase-current Transformation[J]. Automation of Electric Power Systems, 2007, 31(8): 75-79
Authors:ZHANG Qingchao  YANG Jinfei
Affiliation:Tianjin University, Tianjin 300072, China
Abstract:A novel method of identifying fault line for single phase-to-earth fault in non-direct earth neutral system based on two-phase-current transformation (TPCT) is presented. TPCT is an algorithm that the currents of phase-a,-b and-c of each line add their leading current of phase-b,-c and-a that is turned 60 degree clockwise, respectively. The criterion of faulted-line identification is that the three-phase currents by TPCT of healthy line are equal while the three-phase currents by TPCT of faulted line are different, which has been proved theoretically. Computer simulation shows that the method of the proposed fault-line identification is not affected by fault resistance and load flow and can identify fault line correctly when a single phase to earth fault occurs in non-direct earth neutral system.
Keywords:non-direct earth neutral system   two phase-current transformation   single phase to earth fault
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电力系统自动化》浏览原始摘要信息
点击此处可从《电力系统自动化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号