激光斜冲击强化曲轴

激光加工连杆轴颈与曲柄连接处圆角区域曲面时、激光光束不能保证与曲面上每点切线方向始终是垂直的,这个过程就是激光斜冲击强化过程.本文用江苏大学激光技术研究所生产的YAG激光器,斜冲击强化连杆轴颈与曲柄连接处圆角区域.冲击后在受冲击区域显微硬度比未冲击区域提高了65%-75%左右,残余应力比未冲击区域提高了80%-100%左右,使用寿命提高了150%.而这种显微硬度和残余压应力的提高对提高材料的疲劳寿命、抗磨损能力和抗腐蚀能力等表面机械性能都是有益的.激光斜冲击曲轴连杆轴颈与曲柄处圆角,残余应力和显微硬度提高最大处为圆角中心处,而这个位置正是易产生疲劳裂纹处,而圆角边缘处是疲劳强度非敏感区,对裂纹的产生影响不大.

Oblique Laser Shock Processing Crankshaft

When laser shock connecting surface which is circle angle area between crankshaft connecting rod and crank,it can't make the beam vertical to the tangency direction of the point in the surface,which is called oblique laser shock processing.The paper uses the YAG laser machine shocks connecting surface which is circle angle area between crankshaft connecting rod and crank in the institution of laser technology.The micro-hardeness of the laser shock area increases about 65%-75% than that of non shock area and...