首页 | 本学科首页   官方微博 | 高级检索  
     

隙缝馈电平面阵天线
引用本文:田宪祖.隙缝馈电平面阵天线[J].电子与信息学报,1983,5(3):192-196.
作者姓名:田宪祖
作者单位:中国科学院电子学研究所
摘    要:正 (一)基本要求 合成孔径雷达原理样机需要一部工作在X波段,发射水平极化波的扇形波束天线。天线的波束宽度沿飞机航向(E平面)约1,垂直于航向(H平面)为9,增益为30 dB;或在H平面上于11的波束宽度内,将波束赋形为CSC2()为波束宽度),增益为27dB。天线的结构要适于作侧视安装。 (二)方案选择 满足以上条件的天线方案有三类:(1)以线阵作照射器,柱形抛物面作反射器的复合天线;(2)以线阵作辐射器,外加有一定张角的两块板构成线阵喇叭形天线;(3)平面

收稿时间:1982-05-19

SLOT FEEDING PLANAR ARRAY ANTENNA
Tian Xianzu.SLOT FEEDING PLANAR ARRAY ANTENNA[J].Journal of Electronics & Information Technology,1983,5(3):192-196.
Authors:Tian Xianzu
Affiliation:Institute of Electronics; Academia Sinica
Abstract:The article describes a planar array with a slot feeding structure in x-band. The design of the slot linear array with rectangular waveguide and the radiation patterns (E plane and H plane) of the slot feeding planar array are discussed. It is not difficult to design an aperture distribution of the linear array, in order to obtain a specified vertical pattern by means of various slant angles of the slot and phase shifts of the phaser. The calculated and experimental results are also shown.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《电子与信息学报》浏览原始摘要信息
点击此处可从《电子与信息学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号