| 提高一字型硬质合金钎头产品质量的主要途径 |
| |
| 引用本文： | 陈达胜,杨树杰,程铁鹰. 提高一字型硬质合金钎头产品质量的主要途径[J]. 矿业研究与开发, 1991, 0(1) |
| |
| 作者姓名： | 陈达胜 杨树杰 程铁鹰 |
| |
| 作者单位： | 国家有色冶金机械质量监督检验测试中心(陈达胜，杨树杰)，国家有色冶金机械质量监督检验测试中心(程铁鹰) |
| |
| 摘 要： | 文章重点剖析了目前我国一字型硬质合金钎头产品质量差的主要原因是采用普通碳素钢或只含铬的合金钢做钎头壳体,致使其硬度低、韧性差、对合金片夹持力弱、不耐磨、钎头寿命短。针对存在问题,提出采用符合国情、空冷性能好、强度高、对合金片夹持力强、耐磨蚀的40MnMoV优质合金钢做钎头壳体,可提高其使用寿命,降低穿孔成本,给用户带来显著的经济和社会效益。
|
| 关 键 词： | 一字型钎头 矿用硬质合金 钎头寿命 |
AN APPROACH TO IMPROVING THE QUALITY OF CHISEL INSERT BITS |
| |
| Chen Dasheng Yang Shujie Cheng Tieyin. AN APPROACH TO IMPROVING THE QUALITY OF CHISEL INSERT BITS[J]. Mining Research and Development, 1991, 0(1) |
| |
| Authors: | Chen Dasheng Yang Shujie Cheng Tieyin |
| |
| Abstract: | Through analysis, it was found that the main reason for the inferior quality of current Chinese chisel insert bits is the straight carbon steel or chromium steel used to make bit body with low hardness, poor fenacity, weak insert-clampe'd force, poor wear resistance and short service life. For the elimination of existing problems, it is recommended to use fine 40MnMoV alloy steel with good air-cooled performance, high strength, strong insert-clamped force and wear-resistance as bit body so as to improve its service life, reduce drilling cost and bring about remarkable economical and social benefits. |
| |
| Keywords: | Chisel bit Carbide insert for mining Bit service life |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《矿业研究与开发》浏览原始摘要信息 |
|
点击此处可从《矿业研究与开发》下载全文 |
|
