| 辊弯成型设计实践 |
| |
| 引用本文： | 邢金良. 辊弯成型设计实践[J]. 钢管, 1996, 0(5): 18-19 |
| |
| 作者姓名： | 邢金良 |
| |
| 作者单位： | 宝钢集团南京轧钢总厂 |
| |
| 摘 要： | 结合辊弯成型设计实例，提出了在辊弯成型的孔型设计中影响产品精度的主要因素──成品孔型的设置，同时强调ＣＡＤ系统对中间机架变形量分配加以分析的必要性。
|
| 关 键 词： | 辊弯成型，孔型设计，成品孔型设置 |
PRACTICE OF DESIGN OF ROLL-BENDING FORMATION |
| |
| Xing Jinliang. PRACTICE OF DESIGN OF ROLL-BENDING FORMATION[J]. Steel Pipe, 1996, 0(5): 18-19 |
| |
| Authors: | Xing Jinliang |
| |
| Abstract: | Based on examples concerning design of roll-bending formation,the author holds that the set up of the final product pass plays an important role in pass designing for roll-bending formation,which affects the accuracy of the product and that it is necessary to use CAD system to analyse the deformation distribution in intermediate stands. |
| |
| Keywords: | Roll-bending formation Pass design Final product pass set-up |
| 本文献已被 CNKI 维普 等数据库收录！ |
