| 大尺寸薄壁旋转零件爆炸成形 |
| |
| 引用本文： | 邓汉祥 袁文豪. 大尺寸薄壁旋转零件爆炸成形[J]. 爆破器材, 1996, 0(6): 20-23 |
| |
| 作者姓名： | 邓汉祥 袁文豪 |
| |
| 作者单位： | 西安近代化学研究所 |
| |
| 摘 要： | 在爆炸成形工艺中，提供给毛坯各部位的爆炸能量应与该部位的变形量相一致，文章根据这一原理，合理选择药形、药位和药量等参数，通过试验取得最佳爆炸参数，并对试验结果作了分析和讨论。
|
| 关 键 词： | 爆炸成形 旋转体 薄壁件 金属 |
Explosive Forming of Large Scale Rotating Parts with Thin Wall |
| |
| Deng Hanxiang, Yuan Wenhao. Explosive Forming of Large Scale Rotating Parts with Thin Wall[J]. Explosive Materials, 1996, 0(6): 20-23 |
| |
| Authors: | Deng Hanxiang Yuan Wenhao |
| |
| Abstract: | In the explosive forming technology, the explosion energy supplied to each part of metal blanks should be consist with that needed to deform. According to this principle, the shape, the place and the mass of explosive were reasonably selected, and the optimum parameters were obtained by experiments. Finally, the results of the experiments were also analyzed and discussed. |
| |
| Keywords: | explosive forming rotating parts thin wall parts |
| 本文献已被 CNKI 维普 等数据库收录！ |
