| 多向弯曲制件级进模的优化设计 |
| |
| 引用本文： | 欧阳波仪. 多向弯曲制件级进模的优化设计[J]. 模具工业, 2007, 33(5): 22-25 |
| |
| 作者姓名： | 欧阳波仪 |
| |
| 作者单位： | 株洲职业技术学院,湖南,株洲,412001 |
| |
| 摘 要： | 根据支架零件的多向弯曲特征,确定了级进模冲压生产工艺,设计了合理的排样方案,介绍了模具结构设计,与传统的模具结构设计相比较,提高了模具的可靠性,降低了开发成本。可供类似零件的级进模设计作参考。
|
| 关 键 词： | 多向弯曲 排样设计 级进模 结构优化 |
| 文章编号： | 1001-2168(2007)05-0022-04 |
| 修稿时间： | 2006-11-28 |
Optimization design of progressive die for multi-direction bending part |
| |
| OUYANG Bo-yi. Optimization design of progressive die for multi-direction bending part[J]. Die & Mould Industry, 2007, 33(5): 22-25 |
| |
| Authors: | OUYANG Bo-yi |
| |
| Affiliation: | Zhuzhou Professional Technology College, Zhuzhou, Hunan 412001, China |
| |
| Abstract: | The stamping process of a progressive die for a support part was developed according to its multi-direction bending characteristic.The layout design of the part and the design of the die structure were discussed in detail.The die operates reliably at a lower cost compared with the conventional dies. |
| |
| Keywords: | multi-direction bending layout design progressive die structural optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
