| 粉末冶金烧结铁基材料的耐磨性 |
| |
| 引用本文： | 赵宇,陈莉,姜永春. 粉末冶金烧结铁基材料的耐磨性[J]. 铁合金, 2006, 37(1): 24-27 |
| |
| 作者姓名： | 赵宇 陈莉 姜永春 |
| |
| 作者单位： | 1. 长春工业大学材料科学与工程学院,长春,中国,130012
2. 通化钢铁公司建安公司,通化,中国,134003 |
| |
| 摘 要： | 用粉末冶金方法制备铁基材料，研究了铁基材料中加入不同合金元素进行烧结后，对耐磨性、密度和硬度的影响，得出了在铁基材料中加入RE、S、Mo、Cu、Sn、P、Mn等元素对耐磨性的提高均有利的结果，而综合分析Fe-C-RE和Fe-C-Cu—P-Mo粉末冶金材料具有较好的应用价值。
|
| 关 键 词： | 粉末冶金 铁基材料 耐磨性 |
| 文章编号： | 1001-1943(2006)01-0024-04 |
| 收稿时间： | 2005-10-13 |
| 修稿时间： | 2005-10-13 |
POWDER METALLURGY SINTERED IRON-BASE MATERIAL''''S WEAR-ABILITY |
| |
| Zhao Yu,Chen Li,Jiang Yongchun. POWDER METALLURGY SINTERED IRON-BASE MATERIAL''''S WEAR-ABILITY[J]. Ferro-alloys, 2006, 37(1): 24-27 |
| |
| Authors: | Zhao Yu Chen Li Jiang Yongchun |
| |
| Abstract: | Powder metallurgy is introduced to make iron-base material to which different alloy elements are added and then sintered to study the impacts on its wear-ability, density and hardness. The achieved results show that the wear-ability can be greatly increased by adding rare-earth, S, Mo, Cu, Sn, P and Mn elements to the iron-base material. The synthetically analysis of Fe-C-RE and Fe-C-Cu-P-Mo powder metallurgy material proves a better application value. |
| |
| Keywords: | powder metallurgy iron-base material wear-ability |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
