首页 | 本学科首页   官方微博 | 高级检索  
     

硅铁闪速燃烧合成氮化硅铁
引用本文:祝少军,孙加林,陈俊红,占华生,洪彦若.硅铁闪速燃烧合成氮化硅铁[J].耐火材料,2004,38(4):249-251.
作者姓名:祝少军  孙加林  陈俊红  占华生  洪彦若
作者单位:北京科技大学材料科学与工程学院,北京,100083
基金项目:国家自然科学基金资助项目 (50 1 72 0 0 7,50 332 0 1 0 )
摘    要:利用闪速燃烧合成新技术 ,以粒度≤ 0 .0 88mm的FeSi75硅铁细粉为原料 ,在 0 .2MPa的低氮气压力与 14 0 0℃的燃烧温度条件下 ,制备了细蜂窝状氮化硅铁。XRD和SEM分析结果表明 ,这种氮化硅铁主要由短柱状β Si3N4 相和Si3Fe相组成 ,其结构特征是以Si3Fe形成核心 ,并被Si3N4 包裹。同时 ,还用热力学原理探讨了由硅铁闪速燃烧合成氮化硅铁的工艺条件、形成产物的形式、反应的中间产物和残留金属的形态。热力学研究结论和实验检测结果相一致 ,从而在理论上阐明了闪速燃烧合成是制备氮化硅铁的一种理想工艺

关 键 词:氮化硅铁  闪速燃烧合成  硅铁  热力学
修稿时间:2003年12月10

Flash combustion synthesis of ferro silicon nitride with ferrosilicon
Zhu Shaojun,Sun Jialin,Chen Junhong,et alCollege of Materials Science and Engineering,University of Science & Technology Beijing,Beijing ,China.Flash combustion synthesis of ferro silicon nitride with ferrosilicon[J].Refractories,2004,38(4):249-251.
Authors:Zhu Shaojun  Sun Jialin  Chen Junhong  College of Materials Science and Engineering  University of Science & Technology Beijing  Beijing  China
Affiliation:Zhu Shaojun,Sun Jialin,Chen Junhong,et alCollege of Materials Science and Engineering,University of Science & Technology Beijing,Beijing 100083,China
Abstract:
Keywords:Ferro silicon nitride  Flash combustion synthesis(FCS)  Ferrosilicon  Thermodynamics
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号