| 热加工后SiC颗粒的分布对喷射沉积7075/SiC_p复合材料性能的影响 |
| |
| 引用本文： | 吉喆,席锦会,王延庆,崔永丽,袁武华.热加工后SiC颗粒的分布对喷射沉积7075/SiC_p复合材料性能的影响[J].粉末冶金技术,2009,27(4). |
| |
| 作者姓名： | 吉喆 席锦会 王延庆 崔永丽 袁武华 |
| |
| 作者单位： | 1. 中国矿业大学,材料科学与工程学院,江苏徐州,221116
2. 湖南大学,材料科学与工程学院,长沙,410082 |
| |
| 基金项目： | 中国矿业大学科技基金资助项目 |
| |
| 摘 要： | 研究了多层喷射沉积大尺寸7075/SiCp复合材料的沉积坯和挤压坯两种坯料经过循环压制加工后SiC颗粒的分布,测试了复合材料循环压制后的力学性能,通过拉伸断口SEM形貌分析了复合材料的断裂行为.结果表明:沉积坯经过循环压制后发生了SiC颗粒的破碎,但是由于塑性变形程度有限,基体依然不致密,破碎的SiC颗粒团聚在一起,复合材料的强度和伸长率都较低.挤压坯经过循环压制后SiC颗粒尺寸较小、分布均匀,复合材料性能得到提高.
|
| 关 键 词： | 循环压制 多层喷射沉积 7075/SiCp复合材料 SiC颗粒 |
Effect of particle distribution on mechanical properties of multi-layer spray forming 7075/SiC_p composite after hot forming |
| |
| Ji Zhe,Xi Jinhui,Wang Yanqing,Cui Yongli,Yuan Wuhua.Effect of particle distribution on mechanical properties of multi-layer spray forming 7075/SiC_p composite after hot forming[J].Powder Metallurgy Technology,2009,27(4). |
| |
| Authors: | Ji Zhe Xi Jinhui Wang Yanqing Cui Yongli Yuan Wuhua |
| |
| Affiliation: | Ji Zhe1),Xi Jinhui1),Wang Yanqing1),Cui Yongli1),Yuan Wuhua2) 1)(College of Material Science and Engineering,China University of Mining & Technology,Xuzhou Jiangsu 221116,China) 2)(College of Material Science and Engineering,Hu'nan University,Changsha 410082,China) |
| |
| Abstract: | Large dimensional spray formed 7075/SiCp composite and extrusion billet were densified by cyclic pressing. The distribution of SiC particles during cyclic pressing was investigated. The tensile properties of the composites were tested and the fracture surface was studied by optical micrographs and SEM. The results show that the deposited and cyclic-pressed billets have low tensile strength and elongation due to pores and the cluster of SiC. After extrusion and subsequent cyclic pressing the tensile strength... |
| |
| Keywords: | cyclic pressing multi-layer spray deposition 7075/SiCp composite SiC particle |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
