| 聚丙烯发泡体系的挤出胀大和泡孔平均直径预测模型 |
| |
| 引用本文： | 王喜顺,梁碧珊.聚丙烯发泡体系的挤出胀大和泡孔平均直径预测模型[J].中国塑料,2006,20(2):65-68. |
| |
| 作者姓名： | 王喜顺 梁碧珊 |
| |
| 作者单位： | 华南理工大学工业装备与控制工程学院塑料橡胶装备及智能化研究中心,广东广州510640 |
| |
| 摘 要： | 利用改进后的毛细管流变仪研究了温度、发泡剂与碳酸钙含量对聚丙烯发泡体系挤出胀大和泡孔直径的影响。综合胀大比与毛细管数的关系，提出了聚丙烯发泡体系挤出胀大和泡孔平均直径的预测模型。与实验结果相比，发泡体系挤出胀大的预测值与实验测量结果的误差在5％左右，气泡平均直径的预测值与实验测量值的误差在10％左右，表明所提出的预测模型能正确预测实验值。
|
| 关 键 词： | 聚丙烯发泡体系 碳酸钙 挤出胀大 泡孔直径 毛细管数 预测模型 |
| 文章编号： | 1001-9278（2006）02-0065-04 |
| 收稿时间： | 2005-08-30 |
| 修稿时间： | 2005-08-30 |
Model for Predicting Extrudate Swell and Cell Average Diameter in Foamed Polypropylene |
| |
| WANG Xi-shun, LIANG Bi-shan.Model for Predicting Extrudate Swell and Cell Average Diameter in Foamed Polypropylene[J].China Plastics,2006,20(2):65-68. |
| |
| Authors: | WANG Xi-shun LIANG Bi-shan |
| |
| Abstract: | The influences of temperature, content of foaming agent and CaCO3 on the extrudate swell, and average cell diameter of polypropylene foam are investigated using improved capillary rheometer. A model for predicting extrudate swell and average cell diameter of polypropylene foam is proposed based on the relationship between the extrudate swell and capillary number. Comparing the model predictions with experimental data, the error is about 5 % for the extrudate swell, and about 10 % for the average cell diameter. |
| |
| Keywords: | polypropylene foam calcium carbonate extrudate swell cell diameter capillary number model for predicting |
| 本文献已被 CNKI 维普 等数据库收录！ |
