| 多墙翼面结构后屈曲强度试验和数值研究 |
| |
| 引用本文： | 刘华峰,岳珠峰.多墙翼面结构后屈曲强度试验和数值研究[J].中国机械工程,2010(5). |
| |
| 作者姓名： | 刘华峰 岳珠峰 |
| |
| 作者单位： | 西北工业大学; |
| |
| 基金项目： | 国家863高技术研究发展计划资助项目(2009AA04Z418); 国家自然科学基金资助项目(50775183) |
| |
| 摘 要： | 采用静态试验和有限元分析相结合的方法研究了复合材料中厚蒙皮多墙翼面结构的后屈曲性态、强度和破坏过程。有限元分析取得的载荷-位移曲线和试验结果的一致性说明了有限元模型的正确性。在此模型基础上,采用非线性弧长法追踪外载-位移路径,研究了盒段在压缩和集中力两种不同载荷下的后屈曲行为。给出了屈曲临界载荷和屈曲变形性态,分析了后屈曲强度和破坏过程。
|
| 关 键 词： | 复合材料 后屈曲 盒段 有限元法 多墙 中厚蒙皮 |
Post-buckling Test and Numerical Analysis of Multi-spar Wing Box |
| |
| Liu Huafeng Yue Zhufeng Northwestern Polytechnical University,Xi\'an.Post-buckling Test and Numerical Analysis of Multi-spar Wing Box[J].China Mechanical Engineering,2010(5). |
| |
| Authors: | Liu Huafeng Yue Zhufeng Northwestern Polytechnical University Xi\'an |
| |
| Affiliation: | Liu Huafeng Yue Zhufeng Northwestern Polytechnical University,Xi\'an,710072 |
| |
| Abstract: | The bending static experiments and FEM were used to study the post-buckling performance of a composite thick-skin multi-spar wing box.The well agreements of the load-displacement curves between experiment and FEM show the FEM modeling is credible.Based on this FEM model,the post-buckling behaviors of the wing box under two different loads:concentrate and press load,were investigated.The buckling behaviors were determined by tracing the load-deflection curves using non-linear arc-length method.Numerical resu... |
| |
| Keywords: | composite material post-buckling wing box finite element method(FEM) multi-spar thick skin |
| 本文献已被 CNKI 等数据库收录！ |
