| 高频感应钎焊硬质合金接头热处理工艺研究 |
| |
| 引用本文： | 迟辉,张伟,赵维巍,宋日家. 高频感应钎焊硬质合金接头热处理工艺研究[J]. 热加工工艺, 2007, 36(7): 34-35 |
| |
| 作者姓名： | 迟辉 张伟 赵维巍 宋日家 |
| |
| 作者单位： | 1. 大连轻工业学院,机械工程与自动化学院,辽宁,大连,116034
2. 哈尔滨工业大学,材料科学与工程学院,黑龙江,哈尔滨,150001 |
| |
| 摘 要： | 利用高频感应钎焊技术，在不同的钎焊温度和热处理温度下制备硬质合金枪钻头试样，在自制的装置上测试其剪切破坏力大小，结合对接头的微观组织观察得出钎焊温度和热处理温度对接头强度的影响规律。
|
| 关 键 词： | 钎焊强度 硬质合金 热处理 枪钻头 |
| 文章编号： | 1001-3814(2007)01-0034-02 |
| 修稿时间： | 2006-12-31 |
Study of Heat Treatment Technics on Carbide Joint by High Frequency Induction Brazing |
| |
| CHI Hui,ZHANG Wei,ZHAO Wei-wei,SONG Ri-jia. Study of Heat Treatment Technics on Carbide Joint by High Frequency Induction Brazing[J]. Hot Working Technology, 2007, 36(7): 34-35 |
| |
| Authors: | CHI Hui ZHANG Wei ZHAO Wei-wei SONG Ri-jia |
| |
| Abstract: | Using the technology of high frequency induction brazing, under the different temperature of brazing and heat treatment,the sample of carbide gundrill tip was manufactured. Using self-made equipment the strength of cutting breakage of the sample was measured. Observing the microstructure of the joint, an effect law of the temprature of brazing and heat treatment on the joint strength was obtained. |
| |
| Keywords: | brazing strength carbide heat treatment gtmdrill tip |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
