首页 | 本学科首页   官方微博 | 高级检索  
     

含氧化钛高炉型渣表面张力的测定
引用本文:杨祖磐,吴铿,黄振奇.含氧化钛高炉型渣表面张力的测定[J].金属学报,1988,24(2):210-213.
作者姓名:杨祖磐  吴铿  黄振奇
作者单位:沈阳东北工学院冶金物化教研室,东北工学院,东北工学院 教授,北京钢铁学院博士研究生
摘    要:攀钢大高炉冶炼中发现含氧化钛高于25%的渣,出现泡沫渣现象,并溢出渣罐妨碍生产。生成泡沫渣有两个条件:一是在熔渣内部有足够大量而分散的气体源;二是熔渣表面张力低、表观粘度高,使气泡稳定且有足够的机械强度、不易破坏或合并。已证实在含氧化钛高炉渣中悬浮着碳化钛、氮化钛及碳氮化钛微粒,这些微粒提高了熔渣的表观粘度,是使气泡稳定的重要因素之一。有人用气泡最大压力法,测定含氧化钛高炉型渣的表面张力,指出氧化钛是表面活性物质。但

关 键 词:氧化钛高炉型合成渣  表面张力  座滴法
收稿时间:1988-02-18
修稿时间:1988-02-18

SURFACE TENSION OF BLAST FURNACE TYPE SLAGS CONTAINING TITANIUM OXIDES
YANG Zupan Professor,Laboratory of Metallurgical Physical Chemistry,Northeast University of Technology,Shenyang,WU Keng,HUANG Zhenqi Northeast University of Technology,Shenyang.SURFACE TENSION OF BLAST FURNACE TYPE SLAGS CONTAINING TITANIUM OXIDES[J].Acta Metallurgica Sinica,1988,24(2):210-213.
Authors:YANG Zupan Professor  Laboratory of Metallurgical Physical Chemistry  Northeast University of Technology  Shenyang  WU Keng  HUANG Zhenqi Northeast University of Technology  Shenyang
Abstract:The surface tension of quinary blast furnace type synthetic slags containg titanium oxides has been measured by means of sessile drop method. The influences of TiO_2, MgO and basicity on the surface tension of the slag has also been studied. It was found that TiO_2 is a surface active component. The surface tension of quinary slag may increase as TiO_2 was substi- tuted by the same quantity of lower-valent titanium oxides.
Keywords:blast furnace type slags containing titanium oxides  surface tension  sessile drop methods
本文献已被 CNKI 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号