首页 | 本学科首页   官方微博 | 高级检索  
     

紫外光固化防潮涂料的研制
引用本文:刘红姣,林安,朱本玮. 紫外光固化防潮涂料的研制[J]. 材料保护, 2009, 42(12)
作者姓名:刘红姣  林安  朱本玮
作者单位:1. 江汉大学化学与环境工程学院,湖北,武汉,430056
2. 武汉大学资源与环境科学学院,湖北,武汉,430072
摘    要:电子线路板常用的溶剂型涂料固化速度慢,且对环境有污染.利用光引发剂把紫外光引入涂料制备了一种电子线路板紫外光固化防潮涂料,研究了涂料主要组分的含量对涂膜固化时间、硬度和附着力的影响,在此基础上优化了涂料配方,同时,按国家标准对涂膜的电学、防潮及抗酸碱盐性能进行了测试.结果表明:当低聚物EPA和PUA含量比为6:4,光引发剂1173含量为4%~5%,TMPTA含量为20%时,涂膜综合性能最佳,能满足印刷电路板大规模生产的要求.

关 键 词:防潮涂料  紫外光固化  印刷电路板  抗酸碱盐性能

Development of Ultraviolet Cured Damp-Proof Coating for Printed Circuit Board
LIU Hong-jiao,LIN An,ZHU Ben-wei. Development of Ultraviolet Cured Damp-Proof Coating for Printed Circuit Board[J]. Journal of Materials Protection, 2009, 42(12)
Authors:LIU Hong-jiao  LIN An  ZHU Ben-wei
Affiliation:LIU Hong-jiao1,UN An2,ZHU Ben-wei2(1.College of Chemi cal , Environmental Engineering,Jianghan University,Wuhan 430056,China,2.School of Resource , Environmental Sci ence,Wuhan University,Wuhan 430072,China)
Abstract:An ultraviolet cured damp-proof coating applicable to printed circuit board was prepared by using a photo initiator to introduce ultraviolet into paints.The influence of the dosage of the main ingredients in the paints on the curing time,hardness,and adhesion force of the coating was investiga-ted,and the formulation of the paints was then optimized.At the same time,the electronic performance,anti-damp behavior,and resistance to acid,alkali,and salt of the coating wen;also evalu-ated.Results show that the c...
Keywords:damp-proof coating  ultraviolet curing  printed circuit board  resistance to acid,alkali and salt
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号