On the nature of eutectic carbides in Cr-Ni white cast irons

The mechanical and tribological properties of white cast irons are strongly dependent on whether they contain M₇C₃ or M₃C carbides (M = Fe, Cr,etc.). In an effort to improve the wear resistance of such materials, the United States Bureau of Mines has studied the effects of adding 0.3 to 2.3 wt pct (throughout) Si to hypoeutectic irons containing approximately 8.5 pct Cr and 6.0 pct Ni. The eutectic carbides formed were identified by electron microprobe analysis, X-ray diffraction, and scanning electron (SEM) and optical microscopies. In addition, differential thermal analysis (DTA) was used to study the process of solidification. At Si contents of 0.3 and 1.2 pct, the eutectic carbides exhibited a duplex structure, consisting of cores of M₇C₃ surrounded by shells of M₃C. Additionally, the microstructure contained ledeburite (M₃C + γFe (austenite)). At the higher Si content of 1.6 pct, the eutectic carbides consisted entirely of M₇C₃, and some ledeburite remained. Last, when the Si content was raised to 2.3 pct, the eutectic carbides again consisted entirely of M₇C₃, but ledeburite was no longer formed. These observations can be explained in terms of the effects of Si and, to a lesser extent, of Ni on the shape of the liquidus surface of the metastable Fe-Cr-C phase diagram. The addition of Si reduces the roles played by the four-phase class IIp reactionL + M₇C₃ → M₃C + γFe and the ledeburitic eutectic reactionL → M₃C + γFe in the overall process of solidification. N.H. Macmillan, for-merly with the Albany Research Center.