首页 | 本学科首页   官方微博 | 高级检索  
     

圆柱形阳极层霍尔推进器的工作特性与离子束流研究
引用本文:许丽,王世庆.圆柱形阳极层霍尔推进器的工作特性与离子束流研究[J].真空科学与技术学报,2012,32(9):810-813.
作者姓名:许丽  王世庆
作者单位:成都理工大学工程技术学院 乐山614007;核工业西南物理研究院 成都610041
摘    要:主要对圆柱形阳极层霍尔推进器进行实验研究,得到推进器的工作特性、离子束分布、束流中电子的含量等结果。并且给出圆柱形阳极层霍尔推进器的最佳工作参数:工作电压在700~1000 V之间,电流在0.15~0.65 A,气体流量低于8 ml/min。从离子束流的径向分布可知:高电压、低电流、小气量时离子束的发散角较小。

关 键 词:圆柱形阳极层霍尔推进器  离子束  比冲  发散角

Operation Characteristics and Ion Beam Distribution of Cylindrical Anode Layer Hall Thruster
Xu Li , Wang Shiqing.Operation Characteristics and Ion Beam Distribution of Cylindrical Anode Layer Hall Thruster[J].JOurnal of Vacuum Science and Technology,2012,32(9):810-813.
Authors:Xu Li  Wang Shiqing
Affiliation:1,2(1.The Engineering and Technical College of Cheng du University of Technology,Leshan 614007,China;2.Southwestern Institute of Physics,Chengdu 610041,China)
Abstract:The structures and the operation characteristics of the cylindrical anode layer Hall thruster were experimentally studied.The ion beam distribution and electron density of the ion beam were evaluated with the lab-built setup,made up of six probes.The impacts of the operation conditions,such as the operating voltage,discharge current,pressure,and gas flow rate,on the operation characteristics were evaluated.The results show that the ion beam divergence angle depends to a varying degree on the operation conditions.For instance,a smaller divergence angle was found to originate from a higher voltage,a lower discharge current and a weaker gas flow rate.The optimized conditions were found to be an operating voltage ranging from 700 to 1000 V,a discharge current in the range of 0.15 to 0.65 A,and a gas flow rate of 8 ml/min.
Keywords:Cylindrical Anode layer Hall thruster  Ion beam  Specific impulse  Divergence angle
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号