New benchmark problems for verification of the curve-to-surface contact algorithm based on the generalized Euler–Eytelwein problem

Development of the numerical contact algorithms for finite element method usually concerns convergence, mesh dependency, etc. Verification of the numerical contact algorithm usually includes only a few cases due to a limited number of available analytic solutions (e.g., the Hertz solution for cylindrical surfaces). The solution of the generalized Euler–Eytelwein, or the belt friction problem is a stand alone task, recently formulated for a rope laying in sliding equilibrium on an arbitrary surface, opens up to a new set of benchmark problems for the verification of rope/beam to surface/solid contact algorithms. Not only a pulling forces ratio ${\displaystyle \frac{T}{T_0}}$, but also the position of a curve on a arbitrary rigid surface withstanding the motion in dragging direction should be verified. Particular situations possessing a closed form solution for ropes and rigid surfaces are analyzed. The verification study is performed employing the specially developed Solid-Beam finite element with both linear and $C1$-continuous approximations together with the Curve-to-Solid Beam (CTSB) contact algorithm and exemplary employing commercial finite element software. A crucial problem of "contact locking" in contact elements showing stiff behavior despite the good convergence is identified. This problem is resolved within the developed CTSB contact element.