Microstructure and Residual Stress of Alumina Scale Formed on Ti2AlC at High Temperature in Air |
| |
| Authors: | J W Byeon J Liu M Hopkins W Fischer N Garimella K B Park M P Brady M Radovic T El-Raghy Y H Sohn |
| |
| Affiliation: | (1) Advanced Materials Processing and Analysis Center and Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL, USA;(2) University High School, Orange County Public Schools, Central Florida Space Science Institute through National Science Foundation (NSF) Research Experience for Teachers (RET) Program, Orlando, FL, USA;(3) Department of Materials Science and Engineering, Andong National University, Andong, Kyungbuk, Korea;(4) Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA;(5) Deparment of Mechanical Engineering, Texas A&M University, College Station, TX, USA;(6) 3-one-2, LLC, Voorhees, NJ, USA;(7) Present address: Materials Science and Engineerings, University of Ulsan, Ulsan, Kyungnam, Korea |
| |
| Abstract: | Ti2AlC ternary carbide is being explored for various high temperature applications due to its strength at high temperatures,
excellent thermal-shock resistance, and high electrical conductivity. A potential advantage of Ti2AlC over conventional Al2O3-forming materials is the near-identical coefficient of thermal expansion (CTE) of Ti2AlC and α-Al2O3, which could result in superior spallation resistance and make Ti2AlC a promising option for applications ranging from bondcoats for thermal barrier coatings to furnace heating elements. In
this study, isothermal and cyclic oxidation were performed in air to examine the oxidation behavior of Ti2AlC. Isothermal oxidation was performed at 1000, 1200 and 1400 °C for up to 25 h and cyclic oxidation consisted of 1,000 1-hour
cycles at 1200 °C. Characteristics of the oxide scale developed in air, including mass change, residual stress in the α-Al2O3 scale, phase constituents and microstructure, were examined as functions of time and temperature by thermogravimetry, photostimulated
luminescence, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy via focused ion beam in
situ lift-out. Above a continuous and adherent α-Al2O3 layer, a discontinuous-transient rutile-TiO2 scale was identified in the oxide scale developed at 1000 and 1200 °C, while a discontinuous-transient Al2TiO5 scale was identified at 1400 °C. The continuous α-Al2O3scale thickened to more than 15 μm after 25 h of isothermal oxidation at 1400 °C, and after 1,000 1-hour cycles at 1200 °C,
yet remained adherent and protective. The compressive residual stress determined by photoluminescence for the α-Al2O3 scale remained under 0.65 GPa for the specimens oxidized up to 1400°C for 25 hours. The small magnitude of the compressive
residual stress may be responsible the high spallation-resistance of the protective α-Al2O3 scale developed on Ti2AlC, despite the absence of reactive element additions. |
| |
| Keywords: | Ti2AlC Coefficient of thermal expansion Ternary carbide Oxidation Residual stress Photoluminescence spectroscopy Transmission electron microscopy |
| 本文献已被 SpringerLink 等数据库收录！ |
|
