| 16MnR低合金钢与BFe30-1-1异种材料的焊接 |
| |
| 引用本文： | 张亚余,顾福明. 16MnR低合金钢与BFe30-1-1异种材料的焊接[J]. 焊接, 2005, 0(8): 33-36 |
| |
| 作者姓名： | 张亚余 顾福明 |
| |
| 作者单位： | 上海市特种设备监督检验技术研究院,200062;上海市特种设备监督检验技术研究院,200062 |
| |
| 摘 要： | 介绍了某海洋工程中热交换器上所用的水盖封头的制造焊接工艺，分析了16MnR低合金钢与BFe30-1—1铁白铜异种材料焊接的工艺特点，针对16MnR与BFe30-1—1的焊接接头和16MnR与BFe30-1—1复合钢板的焊接接头进行焊接工艺评定试验，并将焊接工艺参数应用于实际产品的组焊中，产品的制造达到设计工程要求。
|
| 关 键 词： | 复合材料焊接 异种材料焊接 铜合金 |
| 收稿时间： | 2005-07-07 |
| 修稿时间： | 2005-07-07 |
RESEARCH ON WELDING PROCESS BETWEEN LOW ALLOY CARBON STEEL (16MnR) AND COPPER ALLOY (BFe30-1-1) |
| |
| Zhang Yayu,Gu Fuming. RESEARCH ON WELDING PROCESS BETWEEN LOW ALLOY CARBON STEEL (16MnR) AND COPPER ALLOY (BFe30-1-1)[J]. Welding & Joining, 2005, 0(8): 33-36 |
| |
| Authors: | Zhang Yayu Gu Fuming |
| |
| Abstract: | This paper introduced manufacturing and welding process of the water head in the heating exchanger, and analyzed the characteristics of welding process between the low alloy carbon steel (16MnR) and copper alloy (BFe30-1-1) as well as the welding process qualification test was done and the welding process for butt weld between 16MnR and BFe30-1-1 and the welding process for butt weld of the composite plate were worked out. The manufacture of the actual products illustrates that it is effective to use this welding process and satisfied to meet technical requirements. |
| |
| Keywords: | composlte plate weld butt weld of different material copper alloy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
