| 高固含量丙烯酸酯改性聚氨酯胶粘剂的研制 |
| |
| 引用本文： | 胡孝勇,朱文强,张泽民,陈锦凡. 高固含量丙烯酸酯改性聚氨酯胶粘剂的研制[J]. 中国胶粘剂, 2011, 20(2) |
| |
| 作者姓名： | 胡孝勇 朱文强 张泽民 陈锦凡 |
| |
| 作者单位： | 1. 广西工学院生物与化学工程系,广西,柳州,545006
2. 江门亿源生化工程有限公司,广东,江门,529000 |
| |
| 摘 要： | 以聚醚多元醇、聚酯多元醇和蓖麻油为混合多元醇,以改性MDI(4,4′-二苯基甲烷二异氰酸酯)及PAPI(多亚甲基多苯基多异氰酸酯)为混合异氰酸酯,合成了聚氨酯(PU)胶粘剂预聚体;然后以PA(羟基丙烯酸酯树脂)作为PU预聚体的改性剂,制得高固含量的PUA(聚丙烯酸酯改性聚氨酯)胶粘剂。结果表明:当m(改性MDI)∶m(PAPI)=1∶1、n(-NCO)∶n(-OH)=2.2∶1、w(PA)=8%(相对于PU质量而言)和w(丙烯酸羟乙酯)=3%(相对于PU质量而言)时,PUA胶粘剂的综合性能较好。
|
| 关 键 词： | 聚氨酯 丙烯酸酯 胶粘剂 蓖麻油 |
Study on preparing high-solid content polyurethane adhesive modified by acrylate |
| |
| HU Xiao-yong,ZHU Wen-qiang,ZHANG Ze-min,CHEN Jin-fan. Study on preparing high-solid content polyurethane adhesive modified by acrylate[J]. China Adhesives, 2011, 20(2) |
| |
| Authors: | HU Xiao-yong ZHU Wen-qiang ZHANG Ze-min CHEN Jin-fan |
| |
| Affiliation: | HU Xiao-yong1,ZHU Wen-qiang1,ZHANG Ze-min1,CHEN Jin-fan2(1.Department of Biological and Chemical Engineering,Guangxi University of Technology,Liuzhou 545006,China,2.Jiangmen Yi-Yuan Biochemical Co.,Ltd.,Jiangmen 529000,China) |
| |
| Abstract: | With polyester polyol,polyether polyol and castor oil as mix polyols,modified MDI(4,4′-diphenyl-methane diisocyanate) and PAPI(multimethylene multiphenyl multiisocyanate) as mix isocyanate,so a poly-urethane(PU) adhesive prepolymer was prepared.Then a PUA(PU modified by polyacrylate) adhesive with high solid content was prepared when PA(hydroxyl acrylate resin) was used as modifier of PU prepolymer.The results showed that the PUA adhesive had well combination property when mass ratio of m(modified MDI)∶m(PAPI) was 1∶1,molar ratio of n(-NCO)∶n(-OH) was 2.2∶1,mass fractions of PA and hydroxy ethyl acrylate were 8% and 3% in PU respectively. |
| |
| Keywords: | polyurethane acrylate adhesive castor oil |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
