| 弯曲冷加工工艺对冷轧无取向硅钢性能的影响 |
| |
| 引用本文： | 张智义,李亚东,陈春梅,高振宇,刘文鹏,毛卫民,杨平. 弯曲冷加工工艺对冷轧无取向硅钢性能的影响[J]. 特殊钢, 2020, 41(5): 60-63 |
| |
| 作者姓名： | 张智义 李亚东 陈春梅 高振宇 刘文鹏 毛卫民 杨平 |
| |
| 作者单位： | 1鞍钢集团钢铁研究院，鞍山114009 ；2北京科技大学材料科学与工程学院，北京100083 |
| |
| 摘 要： | 分析了不同的冷弯曲工艺的冷轧无取向硅钢(%:0.003C,0.80Si,0.28Mn,0.015P,0.003S,0.24Als)经750℃2 h去应力退火后的组织和性能。结果表明,再结晶晶粒弯曲变形后,去应力退火过程表面晶粒的长大使钢板中的不利{111}面织构明显减弱,{111}<112>织构组分也不再突出;还出现了一定量有利的Goss({110}<001>)织构。该弯曲20次工艺既能改善冲压性能,又提高去应力退火后电磁性能
|
| 收稿时间： | 2020-05-03 |
Influence of Bending Cold Working Process on Properties of Clod Rolling Non-Oriented Silicon Steel |
| |
| Zhang Zhiyi,Li Yadong,Chen Chunmei,Gao Zhenyu,Liu Wenpeng,Mao Weimin,Yang Ping. Influence of Bending Cold Working Process on Properties of Clod Rolling Non-Oriented Silicon Steel[J]. Special Steel, 2020, 41(5): 60-63 |
| |
| Authors: | Zhang Zhiyi Li Yadong Chen Chunmei Gao Zhenyu Liu Wenpeng Mao Weimin Yang Ping |
| |
| Affiliation: | 1 Ansteel Group Iron & Steel Research Institute, Anshan 114009；2 School of Materials Science and Engineering, University of Science and Technology Beijing,Beijing 100083 |
| |
| Abstract: | The microstructures and textures in final products of the non-oriented silicon steel(0.003% C,0.80% Si, 0. 28%Mn,0. 015%P,0. 003%S,0. 24% Als) with different cold bending process and stress-relief annealing at 750 °C for 2h are determined and analyzed. The results show that the preferred nucleation and preferred growth of new grains at surface in stresrelief annealing strongly reduce the detrimental {111} texture, particularly the {111}<112> texture component is not predominant and the beneficial Goss texture of ({110}<001>) is promoted. The proposed bending 20 times working process can improve both formability and magnetic properties of stress relief annealed sheet products. |
| |
| Keywords: | Non-Oriented Silicon Steel Bending Cold Deformation Annealing Texture |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
