首页 | 本学科首页   官方微博 | 高级检索  
     

DIN 1.2738塑料模具钢热变形及热加工图分析
引用本文:刘泳,赵海涛,陈红卫,刘宪民,黄凤泽. DIN 1.2738塑料模具钢热变形及热加工图分析[J]. 特殊钢, 2020, 41(1): 16-20
作者姓名:刘泳  赵海涛  陈红卫  刘宪民  黄凤泽
作者单位:1河钢集团钢研总院,石家庄050023;2石钢京诚装备有限公司,营口 115000
基金项目:河北省自然科学基金钢铁联合基金(E2019318013);
摘    要:采用Gleeble-3800热模拟试验机进行了DIN 1.2738塑料模具钢(/%:0.35~0.46C,0.20-0.40Si,1.30~1.60Mn,1.80~2.20Cr,0.90~1.20Ni,0.15~0.23Mo)的热压缩实验,获得了该钢在850~1 250℃、应变速率在0.01~30的应力-应变曲线。基于得到的热变形数据,建立了该钢的峰值应力以及应变补偿的热变形本构方程和热加工图,并结合热加工图的结果分析了该钢合理的热加工参数范围。结果表明,DIN 1.2738钢的热变激活能为354.21 kJ/mol,利用建立的应变补偿的双曲正弦本构方程可对塑料模具钢的热变形曲线进行准确预测,通过加工图的分析可得DIN 1.2738塑料模具钢的最佳的热变形工艺参数范围为:(1)温度950~1 150℃,应变速率0.01~0.7 s-1;(2)温度1 170~1200℃,应变速率0.01~1 s-1

关 键 词:DIN 1.2738塑料模具钢  热变形  本构方程  加工图
收稿时间:2019-08-08

Analysis on Hot Deformation Constitutive Equations and Processing Maps of DIN 1.2738 Die Steel for Plastic
Liu Yong,Zhao Haitao,Chen Hongwei,Liu Xianmin,Huang Fengze. Analysis on Hot Deformation Constitutive Equations and Processing Maps of DIN 1.2738 Die Steel for Plastic[J]. Special Steel, 2020, 41(1): 16-20
Authors:Liu Yong  Zhao Haitao  Chen Hongwei  Liu Xianmin  Huang Fengze
Affiliation:1 HBIS Group Technology Research Institute, Shijiazhuang 0500232 Shigang Jingcheng Equipment Development and Manufacturing Co Ltd, Yingkou 115000
Abstract:Hot compression tests of DIN 1. 2738 die steel for plastic (/% :0. 35 ~0. 46C,0, 20 ~ 0.40Si, 1.30 ~ 1.60Mn,L 80 ~2.20Cr,0.90 ~ 1.20Ni,0.15 ~0.23Mo) are carried out by a Gleeble-3800 thermal-mechanical simulator to get stress-strain curves of steel at 850 ~ 1250℃  with strain rate 0. 01 ~30 s-1. Based on the hot deformation data,the peak stresses of steel, the strain-compensated constitutive equation and hot processing maps are established. Suitable hot deformation parameters are also identified by analyzing the processing maps. The results show that the hot deformation activation energy of DIN 1.2738 steel is 354. 21 kj/mol. Adopting the established strain-compensated constitutive equation, the flow curve can be predicted accurately. The suitable hot deformation parameters for DIN 1.2738 steel are: (1) temperature between 950 ℃ and 1150 ℃,strain rate between 0.01 s-1 and 0.7 s-1 ; (2) temperature between 1170℃. and 1200 ℃, strain rate between 0. 01 s-1 and 1 s-1.
Keywords:   DIN 1.2738 Die Steel for Plastic   Hot Deformation   Constitutive Equation   Processing Maps  
本文献已被 CNKI 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号