| 253MA耐热不锈钢EAF-AOD-LF-板坯连铸生产工艺实践 |
| |
| 引用本文： | 刘睿智,谭建兴,闫建新,武鹏,谢恩敬,王 昕,姚吕金,卫敏. 253MA耐热不锈钢EAF-AOD-LF-板坯连铸生产工艺实践[J]. 特殊钢, 2020, 41(2): 40-42 |
| |
| 作者姓名： | 刘睿智 谭建兴 闫建新 武鹏 谢恩敬 王 昕 姚吕金 卫敏 |
| |
| 作者单位： | 山西太钢不锈钢股份有限公司一炼钢厂，太原030003 |
| |
| 摘 要： | 253MA钢(/%:0.05～0.10C,1.2～2.0Si,20～22Cr,10～12Ni,0.14～0.20N,0.03～0.08Ce)是在21Cr-11Ni不锈钢的基础上,通过N合金化和添加稀土元素Ce开发的耐热奥氏体不锈钢。由于该钢种的熔点偏低,钢液的流动性差。因此,氮气合金化、稀土合金化是冶炼过程中的工艺难点。通过对稀土加入方式、过程脱氧、以及精确控N模型等研究,采用AOD全程氮气搅拌,AOD出钢前按照1.8～2.2 m3/t钢吹氩降氮,钢中[O]可降低到15×10-6～20×10-6,LF按13 m/t钢喂入铈线,实现了253MA不锈钢的批量生产。
|
| 关 键 词： | 氮合金化 稀土合金化 253MA不锈钢 |
| 收稿时间： | 2019-11-08 |
EAF-AOD-LF-Slab Casting Process Practice of Heat Resistance Stainless Steel 253MA |
| |
| Liu Ruizhi,Tan Jianxing,Yan Jianxin,Wu Peng,Xie Enjing,Wang Xin,Yao lujin,Wei Min. EAF-AOD-LF-Slab Casting Process Practice of Heat Resistance Stainless Steel 253MA[J]. Special Steel, 2020, 41(2): 40-42 |
| |
| Authors: | Liu Ruizhi Tan Jianxing Yan Jianxin Wu Peng Xie Enjing Wang Xin Yao lujin Wei Min |
| |
| Affiliation: | No1 Steelmaking Works, Shanxi Taigang Stainless Steel Co Ltd,Taiyuan 030003 |
| |
| Abstract: | Based on 21Cr-llNi stainless steel,steel 253MA (/% ：0. 05 ~0. 10C,l- 2 ~2. 0Si,20 ~22Cr,10 ~ 12Ni, 0. 14 - 0. 20N ,0. 03 ~0. 08Ce) as a heat resistance austenite stainless steel is developed by adding nitrogen and Ce. Because of low melting point of this steel, the fluidity of molten steel is poor. Consequently, the addition of nitrogen and Ce is a difficult problem. The adding RE method, the deoxidization process and the model for N2 content control are studied. With process measures including using N2 stirring in whole AOD process and using Ar stirring 1. 8 ~2. 2 m3/t before AOD taping to decrease nitrogen,and decreasing [O] to 15 x 10 -6 ~20 x 10-6 ,and feeding Ce coils 13 m/t in the steel at LF, the 253MA stainless steel can be produced commercially. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
