|
|||||
|
|
Enhancement of the punch pin durability induced by the PVD coating in production process of the automotive inner pipe |
|
| Authors: | Chang-Min Suh Sang-Yeob Oh Young-Sik Pyun |
| Affiliation: | 1.School of Mechanical Engineering,Kyungpook National University,Daegu,Korea;2.School of Mechanical and Automotive Engineering,Kyungpook National University,Sangju, Gyung-buk,Korea;3.Department of Mechanical Engineering,SunMoon University / DM Technical Research Center, Designmecha Co.,Asan,Korea |
| Abstract: | This experimental studies were carried out in order to understand the effects of the PVD coating and the UNSM treatment of HSS55 (high speed steel 55) during the production of the automotive inner pipe by the plastic deformation of S45C. The field test and the SEM images revealed that the PVD coating is necessary in spite of the high compressive residual stresses which were formed at the head of a punch pin. Upon the application of the AlCrN coating with the UNSM treatment the productivity and reliability of a punch pin had improved more than about 2.6 times compared to that of the TiN coating without the UNSM treatment. It is likely that the improvement is caused by the decreased stress concentration factor by the ‘wrapped in oxides’ inside of an abrasion pit. The abrasion pits were mostly generated within range of 5% ∼ 50% of the diameter ratio from the end of a pin and reached the maximum value about 17% from the end of a pin. |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ | |