| 平面啮合中干涉界限点的判定 |
| |
| 引用本文： | 孙序梁,邓宗全.平面啮合中干涉界限点的判定[J].哈尔滨工业大学学报,1986(2). |
| |
| 作者姓名： | 孙序梁 邓宗全 |
| |
| 作者单位： | 哈尔滨工业大学机械原理教研室
(孙序梁)，哈尔滨工业大学机械原理教研室(邓宗全) |
| |
| 摘 要： | 根据已知的齿条刀具的齿廓方程,讨论平面啮合中的干涉问题,并得出以下结果。被切齿轮齿廓上出现干涉界点的判定方程。被切齿轮齿廓的节点处为非干涉点的条件。当刀具齿廓为n阶多项式曲线时,被切齿轮齿廓上可能出现的干涉界点的最大数目。齿廓上无干涉点时齿轮的最小齿数。
|
| 关 键 词： | 平面啮合 奇点判定方程 |
Judgement of Singular Points in Plane Mating |
| |
| Sun Xuliang Deng Zongquan.Judgement of Singular Points in Plane Mating[J].Journal of Harbin Institute of Technology,1986(2). |
| |
| Authors: | Sun Xuliang Deng Zongquan |
| |
| Affiliation: | Sun Xuliang Deng Zongquan |
| |
| Abstract: | According to the tooth profileequation of a given rack-cutting tool, the cutting interference in plane mating is discussed, and the following results are obtained: the judgement equation for singular points on a cutting gear tooth profile, the non-singularity conditions for a pitch point,the maximum number of singular points on a cutting gear tooth profile when it is of an n-order polynomial type, and minimum tooth number of a cutting gear for non-singularity. |
| |
| Keywords: | plane mating judgement equation of the singular point |
| 本文献已被 CNKI 等数据库收录！ |
