首页 | 本学科首页   官方微博 | 高级检索  
     

基于单片机的超声波测距系统的设计
引用本文:张丹,贺西平.基于单片机的超声波测距系统的设计[J].纺织高校基础科学学报,2008,21(1):117-120.
作者姓名:张丹  贺西平
作者单位:陕西省物理研究所,陕西,西安,710062
摘    要:利用单片机设计了软件及硬件组成的超声波非接触式测距系统.在系统中,检波接收电路和温度补偿电路分别使用了CX20106A和DS18B20两款集成芯片,减少了电路之间的相互干扰,减小电噪声,系统测距范围为0.2~6m,最大测距误差不超过3cm.该系统具有硬件结构简单、工作可靠、流程清晰、精度高等优点,并能实现距离的实时显示.

关 键 词:超声波  测距  单片机
文章编号:1006-8341(2008)01-0117-04
修稿时间:2007年9月8日

Design of ultrasonic distance testing system based on microprocessor
ZHANG Dan,HE Xi-ping.Design of ultrasonic distance testing system based on microprocessor[J].Basic Sciences Journal of Textile Universities,2008,21(1):117-120.
Authors:ZHANG Dan  HE Xi-ping
Affiliation:ZHANG Dan, HE Xi-ping (Shaanxi Institute of Physics, Xi'an 710062,China)
Abstract:A non-contact ultrasonic distance testing system based on microprocessor is presented,and the software and hardware are introduced.The integrated chips of CX20106A and DS18B20 are separately used in the detection accepting circuit and the temperature compensation circuit,the mutual disturbance between circuits and the eletrical noise are reduced.The range of the system is 0.2 to 6m,and the largest error does not exceed 3cm.The proposed system has the advantage of the simple hardware,stable operation,distinct programme flow and high accuracy.The results can also be displayed in real-time.
Keywords:ultrasonic  distance measurement  microprocessor
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号